Originally Posted by billmill3461
I was looking under my 2012 Sprinter 272BHS and didn't see any drains other than the single one for the fresh water tank. Any ideas where to look?
If you will use the search function and look back through some of the threads, there are pics of the low point drains. If your FW drain is a single piece of PEX with a cap on it hanging straight down from the coroplast, the low point drains will likely look the same except that there are two of them together. They might look like this:
Others have drain valves in the control center where all the other hookups are located.
They are there, you just have to look for them. They are generally on the same side of the trailer as the waste gates and the FW fill and drain.
I would also point out that this is one of those important things that the dealer should have shown you during the PDI. We hear a lot of horror stories about dealers not doing a decent job in this regard.
'11 Cougar 326MKS loaded with mods
'12 Ford F250 SuperCab 6.7 PowerStroke Diesel
KD2IAT (146.520) GMRS:
WQPG808 (462.675 TPL 141.3)