chunker
Senior Member
- Joined
- Mar 22, 2015
- Posts
- 2,636
We did get the 2021 Alpine 3700FL and I have a question about the wet bay and parts. We only got a very few manuals with it and I realize that owner's manuals are very generic. The wet bay has few labels and has what appear to be 2 fresh water inlets/hose receptacles. They are on the forward/left side as viewed. On the right/rear are 2 black tank flush connections. The lower connection of the left appears to be the "standard" fresh water connector and there is a valve labeled city water or tank fill. The hose connector on the left/forward side above has no label and is the same type as the "lower" one. Both black connectors are on the right side. I didn't take a picture but am heading down in a couple days and will take one if necessary. Black tank connectors also had no labels but I did figure out which connector went to which tank. PO had also put on short flex hose pigtails for the black.
When we set up the water acted normally connected to the lower left connector however a leak developed from the water heater so all water operation ceased. Water heater is being replaced when I go back down Wednesday. Thanks for any guidance.
When we set up the water acted normally connected to the lower left connector however a leak developed from the water heater so all water operation ceased. Water heater is being replaced when I go back down Wednesday. Thanks for any guidance.