Free 7 Day Trial RV GPS App RV Trip Planner Campground Reviews RV Maintenance Free 7 Day Trial ×
 

Go Back   Keystone RV Forums > Keystone Fleet | Keystone RV Models > Travel Trailers
Click Here to Login

Reply
 
Thread Tools Display Modes
 
Old 05-16-2012, 03:40 PM   #1
glaperche
Junior Member
 
Join Date: May 2012
Location: RHODE ISLAND
Posts: 2
Lcd dismounting

Hey All
New to this forum -- i have a 2012 bullet premier 31bhpr. it has two LCD tv mounted in swivel boxes. I can NOT figure out how to take them off the mount to access their video connections. I called the dealer and his instructions are not relevant. i tried removing the backing cover, but that lead no where. Anyone been there done that?
glaperche is offline   Reply With Quote
Old 05-16-2012, 04:20 PM   #2
Englishman
Senior Member
 
Englishman's Avatar
 
Join Date: Jul 2011
Location: RI
Posts: 207
Do you have mirrors on the back side of the tv? On the 281bhs you can access the back of the tv by removing the mirror thats also how you access the screws that hold the tv on the bracket.
I hope this helps.

Sent from my SPH-P100 using Tapatalk 2
__________________
Roy & Sherri
2012 Bullet 281BHS
2011 Silverado 2500HD
https://thecloudscamping.weebly.com/
Englishman is offline   Reply With Quote
Old 05-25-2012, 07:46 AM   #3
glaperche
Junior Member
 
Join Date: May 2012
Location: RHODE ISLAND
Posts: 2
i was able to access the living room tv by removing the mirror. there is another one in bunkhouse that has no mirror. when i take the back panel off, i still can't access the connectors. the screws holding the tv are thread side to me on another panel. that would indicate the tv could be taken off the bracket some how. But how? But how?????
glaperche is offline   Reply With Quote
Old 05-25-2012, 08:51 AM   #4
f6bits
Senior Member
 
Join Date: Nov 2011
Location: SoCal
Posts: 1,739
When you remove the bunk TV rear panel, can you access the mounting bracket? As is probably the case with your living room TV, there may be two screws on top of the bracket that you can remove to lift the TV off the bracket.
__________________
-Scott, DW, DG, DB, and DD

2011 Passport 2590BH
2009 Ford F150 SuperCrew FX4 5.4L w/Max Tow
f6bits is offline   Reply With Quote
Old 05-25-2012, 08:55 AM   #5
ssurbor
Junior Member
 
Join Date: May 2012
Location: Brooklyn Park, MN
Posts: 2
Once you remove the backside panel of the bunkhouse tv, there are two screws that mount the tv to the bracket. You can feel them with your fingers on the topside of the opening below the bracket. Unscrew those two (having a flexible drive with a phillips head helps) and the tv will left off the bracket. It's a tight squeeze coming out and a little tighter going in but I did it in mine.
ssurbor is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by the Keystone RV Company or any of its affiliates in any way. Keystone RV® is a registered trademark of the Keystone RV Company.


All times are GMT -8. The time now is 05:05 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2021, vBulletin Solutions, Inc.