Hello all. I know this topic has been covered as I've seen in a quick search of the forum. We have a new to us 2014 Keystone Laredo 294rk. Two slides. Large one in living area, smaller one in bedroom. The large slide in the living area will not retract all the way out. It's probably pretty close at the top and needs maybe 1-1/2 to 2 inches at the bottom. The pantry and trash bin doors won't open all the way like it is now. I feel like it was never adjusted properly at the factory because the previous owners were an older couple and the gentleman said that he checked with the dealer shortly after purchasing and was told that since the motor is at the top, "it was designed that way" (to not go all the way out). I can't buy that. We actually went to the Keystone factory in Goshen, IN, and they said that it just needed "an adjustment". Having said All that, it is a cable driven Accu-slide. We have the service manual, have done every which way of tightening and loosening red, blue, green, purple cables until we're scratching our heads. What am I missing? Does the chain need to be shortened/lengthened a link or two? Is there something else going on? When you want the slide to go out and hold the button until it is, presumably, "all the way out", it just, stops. Any enlightenment would surely be appreciated. Thanks.