RV News RVBusiness 2021 Top 10 RVs of the Year, plus 56 additional debuts and must-see units → ×
 

Go Back   Keystone RV Forums > Keystone Fleet | Keystone RV Models > Travel Trailers
Click Here to Login

Reply
 
Thread Tools Display Modes
 
Old 03-25-2019, 08:14 PM   #1
Jason stapleton
Junior Member
 
Join Date: Mar 2019
Location: Huntington Beach
Posts: 8
Furrion Back Up Camera

I have a 2019 Passport 199 MLWE and just purchased the Furrion S back up camera , Plug and Play they say but not so much. No power to the cable coming from the trailer. Anyone have any suggestions on where or what fuse this might be attached to?
The camera is working as i synchronized it to the display. Plugged in my 7pin trailer connector and all good with the running lights on the trailer but nothing to the camera . Not sure what else to do ?
__________________

Jason stapleton is offline   Reply With Quote
Old 03-25-2019, 08:21 PM   #2
meaz93*
Senior Member
 
Join Date: May 2018
Location: Phoenix
Posts: 218
Did you manually switch heads lights or parking lights to the truck on?
__________________

meaz93* is offline   Reply With Quote
Old 03-25-2019, 08:39 PM   #3
Jason stapleton
Junior Member
 
Join Date: Mar 2019
Location: Huntington Beach
Posts: 8
I did, first started with the running lights then headlights and finally put it reverse, nothing seems to power it up
Jason stapleton is offline   Reply With Quote
Old 03-25-2019, 09:45 PM   #4
John&Genny
Senior Member
 
Join Date: Mar 2017
Location: Colbert
Posts: 202
Question

And you do have your trailer batteries connected with the battery disconnect switch turned on? Some of the Keystone camera wiring goes through the Converter DC fuse box and has nothing to do with the truck wiring or pigtail.
__________________
2017 Avalanche 320RS 5'er
2008 Duramax 2500HD Diesel
Andersen Ultimate 5th Wheel hitch
John&Genny is offline   Reply With Quote
Old 03-25-2019, 09:46 PM   #5
meaz93*
Senior Member
 
Join Date: May 2018
Location: Phoenix
Posts: 218
Does your trailer have a battery shut off on one of the storage side compartments? If so could it be in the off position; recheck the Furrion plug & play connection; finally the fuse panel inside the trailer?-weird
meaz93* is offline   Reply With Quote
Old 03-25-2019, 09:49 PM   #6
meaz93*
Senior Member
 
Join Date: May 2018
Location: Phoenix
Posts: 218
Also that cigarette power outlet adapter from the Furrion to the truck could be faulty...can't remember if it has a fuse in it?-check that bad boy out.
meaz93* is offline   Reply With Quote
Old 03-25-2019, 09:54 PM   #7
meaz93*
Senior Member
 
Join Date: May 2018
Location: Phoenix
Posts: 218
I'm sure you've been all over that trailer-lol (not funny when it's happening to you)
It can't (can it?!) really be any other variables that I can think of?Click image for larger version

Name:	20181207_170043.jpeg
Views:	56
Size:	93.5 KB
ID:	21068
meaz93* is offline   Reply With Quote
Old 03-26-2019, 08:41 AM   #8
meaz93*
Senior Member
 
Join Date: May 2018
Location: Phoenix
Posts: 218
Ok Jason.....what did you find out?! And yes the Furrion has a fuse in the power/cigarette power plug in.Click image for larger version

Name:	20190309_165242.jpeg
Views:	48
Size:	74.3 KB
ID:	21071
meaz93* is offline   Reply With Quote
Old 03-26-2019, 08:32 PM   #9
Jason stapleton
Junior Member
 
Join Date: Mar 2019
Location: Huntington Beach
Posts: 8
Meza93 thanks for the info,
I couldn’t find a battery disconnect switch anywhere , I do get power from the battery to the trailer . I don’t know where it would connect into the fuse box other than the 3w fuse for the running lights on the trailer . The cigarette adapter in the truck is good , I was able to sync the camera through the car
One thing that I did notice is the model recommended on the trailer camera mount is the FOS48TA-BL however I got the FOS43TASF, I called Furrion today and they said that shouldn’t be an issue as its basically the same camera, one model comes with the housing and the other doesn’t . My only thought at this point is they never connected the Pre wire cable to anything.
Jason stapleton is offline   Reply With Quote
Old 03-26-2019, 08:44 PM   #10
meaz93*
Senior Member
 
Join Date: May 2018
Location: Phoenix
Posts: 218
I think its time to take it to a Keystone Dealership and have them check it out especially since you are using the rewired factory location and a Furrion....I think your right about it not being wired to power. Try running an experimental power wire from your trailer taillamp to the camera? At least power it up from the trailer, than you will know for sure...
Maybe first see if the Stealership will fix it under warranty since its suppose to be plug & play
Keep us in the know-lol!Click image for larger version

Name:	20180929_092211.jpeg
Views:	56
Size:	74.1 KB
ID:	21088
meaz93* is offline   Reply With Quote
Old 03-26-2019, 08:54 PM   #11
Jason stapleton
Junior Member
 
Join Date: Mar 2019
Location: Huntington Beach
Posts: 8
Love that seat too meaz93 , Lol !!!
Jason stapleton is offline   Reply With Quote
Old 03-26-2019, 08:56 PM   #12
meaz93*
Senior Member
 
Join Date: May 2018
Location: Phoenix
Posts: 218
I'm all about multitasking-lol
meaz93* is offline   Reply With Quote
Old 03-30-2019, 03:54 PM   #13
Jason stapleton
Junior Member
 
Join Date: Mar 2019
Location: Huntington Beach
Posts: 8
‘UPDATE’ !!!! So I pulled off the light above the Furrion Pre Wire hookup ( for the camer ) and discovered that Keystone incorrectly wired the back up camera connector. It was a quick fix at that point . Thanks again meaz93 and John&Jenny for your help
Jason stapleton is offline   Reply With Quote
Old 03-30-2019, 03:59 PM   #14
meaz93*
Senior Member
 
Join Date: May 2018
Location: Phoenix
Posts: 218
Niiiicceeee, thankful for a quick fix ehh!
"Paper or Plastic" on the installer?
Holy crap-lolClick image for larger version

Name:	20181228_113141.jpeg
Views:	35
Size:	34.5 KB
ID:	21137
meaz93* is offline   Reply With Quote
Old 04-11-2019, 07:58 AM   #15
tlist809
Junior Member
 
Join Date: Nov 2018
Location: Union
Posts: 15
On my trailer, the power is run from the center running light. If yours is the same, check to make sure your running light near the camera is on. If it is and you still have no power to the camera, pull that light and see if the connection is made or take the connection apart at the power plug to make sure it is wired right.


Sorry, all the posts did not load on my pc until after I posted. Glad you found it.
tlist809 is offline   Reply With Quote
Old 04-11-2019, 08:11 AM   #16
Bmxdaddy
Junior Member
 
Join Date: Feb 2019
Location: Sherman Oaks
Posts: 1
Check the wiring that is tied into the running light for power & ground. Mine was wired backwards on my 2019 269rlswe.
Bmxdaddy is offline   Reply With Quote
Old 04-11-2019, 08:23 AM   #17
John&Genny
Senior Member
 
Join Date: Mar 2017
Location: Colbert
Posts: 202
Quote:
Originally Posted by Jason stapleton View Post
‘UPDATE’ !!!! So I pulled off the light above the Furrion Pre Wire hookup ( for the camer ) and discovered that Keystone incorrectly wired the back up camera connector. It was a quick fix at that point . Thanks again meaz93 and John&Jenny for your help
You would think it wouldn't be that hard to connect two wires with just a positive and negative, hell, they had a 50/50 chance even if they didn't use a voltmeter. Really, that's pretty sad and speaks volumes about the RV industry.
__________________
2017 Avalanche 320RS 5'er
2008 Duramax 2500HD Diesel
Andersen Ultimate 5th Wheel hitch
John&Genny is offline   Reply With Quote
Old 04-11-2019, 01:06 PM   #18
John F
Junior Member
 
Join Date: Dec 2018
Location: MURRIETA
Posts: 19
Camera

Quote:
Originally Posted by Jason stapleton View Post
I have a 2019 Passport 199 MLWE and just purchased the Furrion S back up camera , Plug and Play they say but not so much. No power to the cable coming from the trailer. Anyone have any suggestions on where or what fuse this might be attached to?
The camera is working as i synchronized it to the display. Plugged in my 7pin trailer connector and all good with the running lights on the trailer but nothing to the camera . Not sure what else to do ?
I had the same issue and they had the positive and negative reversed. I had to take off mounting bracket and pull wires out and reverse them.
John F is offline   Reply With Quote
Old 04-12-2019, 06:42 PM   #19
efrulla
Member
 
Join Date: Aug 2017
Location: Warrensburg
Posts: 32
My Furion is powered off the running lights and obviously they have to be on for the camera to work. You said your running lights are ok so I am at a loss as to how your trailer is wired.
__________________

efrulla is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by the Keystone RV Company or any of its affiliates in any way. Keystone RV® is a registered trademark of the Keystone RV Company.


All times are GMT -8. The time now is 08:01 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
×