 |
05-08-2018, 08:17 PM
|
#1
|
|
Senior Member
Join Date: Jun 2015
Location: LA
Posts: 459
|
New wheels
Do i need new wheels? Here's what's on my springdale 240 I'm replacing the trailer kings after 3years. I looked on the inside of my wheels:
Jingu 09 29 14 made in China 15x5J max load 1870 lbs Dott A19421
 
|
|
|
|
05-08-2018, 08:29 PM
|
#2
|
|
Senior Member
Join Date: Jun 2015
Location: LA
Posts: 459
|
It wouldn't let me edit for some reason. Looking at going with the endurance tire since it's made in the USA.
Also, pictures are from the spare. I'm assuming they are all the same.
|
|
|
|
|
05-08-2018, 08:32 PM
|
#3
|
|
Senior Member
Join Date: Jun 2015
Location: LA
Posts: 459
|
Picture of the wheel 
|
|
|
|
|
05-08-2018, 08:55 PM
|
#4
|
|
Senior Member
Join Date: Feb 2010
Location: Taylors, SC
Posts: 2,994
|
Quote:
Originally Posted by KSH
Do i need new wheels? Here's what's on my springdale 240 I'm replacing the trailer kings after 3years. I looked on the inside of my wheels:
Jingu 09 29 14 made in China 15x5J max load 1870 lbs Dott A19421
Attachment 16356Attachment 16357 |
Do i need new wheels?
No. But, you should replace the valve stems.
|
|
|
|
|
05-09-2018, 03:53 AM
|
#5
|
|
Senior Member
Join Date: Jul 2014
Location: Solomons
Posts: 3,875
|
Might consider putting metal valve stems in so you can run a TPMS if desired. You shouldn’t need to replace the wheels.
__________________
Tom
2019 Alpine 3651RL
2016 F350 CC DRW
|
|
|
|
|
05-09-2018, 06:18 AM
|
#6
|
|
Senior Member
Join Date: Jun 2015
Location: LA
Posts: 459
|
Planning on going to America's tires. I just ask for metal valve stems and they should know what i need correct? So these wheels will go to 80 psi?
|
|
|
|
|
05-09-2018, 06:23 AM
|
#7
|
|
Member
Join Date: Dec 2015
Location: Minnesota
Posts: 56
|
I believe at 1870 lbs. capacity that 50 PSI is the max pressure for those wheels.
__________________
Jeff
2017 Premier 26RBPR
2016 F-150 XLT SCrew 4x4 w/3.5 EcoBoost & MaxTow
Previous: 2014 F150 SCrew 4x4 w/3.5 EcoBoost; 2014 Laredo 274RB
|
|
|
|
|
05-09-2018, 08:41 AM
|
#8
|
|
Senior Member
Join Date: Feb 2010
Location: Taylors, SC
Posts: 2,994
|
Quote:
Originally Posted by KSH
Planning on going to America's tires. I just ask for metal valve stems and they should know what i need correct? So these wheels will go to 80 psi?
|
According to your pictures that's a load limited wheel. It's an OEM wheel and can't be overloaded unless you overload the axle. Overloading the axle causes the GVWR to be over loaded. Get the picture?
Put on whatever tires satisfy your reserve load expectations and air them-up. Just don't exceed the wheel's maximum load.
|
|
|
|
|
05-09-2018, 10:31 AM
|
#9
|
|
Senior Member
Join Date: Jul 2014
Location: Solomons
Posts: 3,875
|
If you can find out who the manufacturer is then you can look up the wheels. I had dexstar wheels in my Passport and they were rated to 65psi. OEM Tire’s were 50psi. I upped the load range and they required 65.
__________________
Tom
2019 Alpine 3651RL
2016 F350 CC DRW
|
|
|
|
|
05-09-2018, 12:44 PM
|
#10
|
|
Senior Member
Join Date: Feb 2010
Location: Taylors, SC
Posts: 2,994
|
Quote:
Originally Posted by Tbos
If you can find out who the manufacturer is then you can look up the wheels. I had dexstar wheels in my Passport and they were rated to 65psi. OEM Tire’s were 50psi. I upped the load range and they required 65.
|
Dexstar is one of the wheel manufacturers that specs their wheels for load and inflation. Not all wheel manufacturers do that. Others just spec theirs for load capacity.
|
|
|
|
|
05-09-2018, 07:02 PM
|
#11
|
|
Senior Member
Join Date: Jun 2015
Location: LA
Posts: 459
|
Anyone have a recommendation for a wheel? It may sound silly but I've never bought wheels before.
|
|
|
|
|
05-10-2018, 08:25 AM
|
#12
|
|
Senior Member
Join Date: Jul 2014
Location: Solomons
Posts: 3,875
|
Quote:
Originally Posted by KSH
Anyone have a recommendation for a wheel? It may sound silly but I've never bought wheels before.
|
My 2 Passports had Dexstar wheels so that’s an option. My Alpine has Sendel wheels.
__________________
Tom
2019 Alpine 3651RL
2016 F350 CC DRW
|
|
|
|
|
05-10-2018, 09:11 AM
|
#13
|
|
Senior Member
Join Date: Jan 2016
Location: Newport News, VA
Posts: 221
|
Quote:
Originally Posted by KSH
Anyone have a recommendation for a wheel? It may sound silly but I've never bought wheels before.
|
I bought wheels from these guys. Very satisfied with quality and price. You can even order full metal valve stems installed.
https://recstuff.com/trailer-wheels/16-inch
__________________
Merlin B.
U.S. Army Aviator, Retired
2016 Cougar XLite 28SGS
2007.5 Ram 3500 DRW
|
|
|
|
|
| Thread Tools |
|
|
| Display Modes |
 Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
All times are GMT -8. The time now is 11:52 AM.
