|
03-14-2020, 09:57 AM
|
#1
|
Senior Member
Join Date: Jan 2020
Location: abq, nm, usa
Posts: 373
|
Bed Tilt
So my 5W has the hardware and controller, Lippert/Schwintek?
But it doesn't work. It was disconnected for some reason and the PO claims no knowledge of it even being there.
So I hooked it up and the lights flash. When I hit the switch there is a click but no motion. Lights flash still, so I go into calibration mode. Same thing, click but no motion.
Any bed tilt experience here?
I'd like to fix it before installing the new mattress...
__________________
Dan and Rita
Prefer not to be hooked up in a RV park
|
|
|
03-14-2020, 10:13 AM
|
#2
|
Site Team
Join Date: Jul 2014
Location: Modesto
Posts: 20,316
|
If the bed tilt is schwintec, the codes will flash the problem. One will blink 1 or 2 times indicating which motor and the other will blink up to 8 times. The codes are printed on the label. read them and post back.
__________________
2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.
Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
|
|
|
03-14-2020, 10:41 AM
|
#3
|
Senior Member
Join Date: Jan 2020
Location: abq, nm, usa
Posts: 373
|
Well that's the problem, they both just flash constantly, either fast or real fast, at the same time. I downloaded the manual hoping for a meaningful code but nope...
__________________
Dan and Rita
Prefer not to be hooked up in a RV park
|
|
|
03-14-2020, 10:48 AM
|
#4
|
Site Team
Join Date: Jul 2014
Location: Modesto
Posts: 20,316
|
disconnect the power, wait 2 minute and try again. Both flashing means the motors are in motion.
__________________
2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.
Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
|
|
|
03-14-2020, 11:58 AM
|
#5
|
Senior Member
Join Date: Jan 2020
Location: abq, nm, usa
Posts: 373
|
Maybe that's why it was disconnected, could be bad motors? They are not in motion.
I have pulled power several times with the same results above...
__________________
Dan and Rita
Prefer not to be hooked up in a RV park
|
|
|
03-14-2020, 12:12 PM
|
#6
|
Site Team
Join Date: Jul 2014
Location: Modesto
Posts: 20,316
|
Sending PM
__________________
2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.
Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
|
|
|
|
Thread Tools |
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|