Towmaster question
Looks like luck was not in my favor. I posted, and that night, the forum changed and trashed my issue. Let's try again. This one is not rocket science.
I have low mileage, Towmaster tires, and about a month ago, I barely touched a curb at under 5mph and DID NOT hit the rim. As a result, I have developed a very slow leak and it's frustrating to say the least. The rig has aluminum wheels.
Question: anyone have experience putting tubes into the tire casing? What is your experience. Also, Do I need to haul this rig from my site. all set up, and tow it to an RV center to have this done? I have no experience in jacking this type of vehicle. Would not want to potentially damage the RV by trial and error jacking and blocking.
36ft, 2011, Outback fifth wheel, triple slide.
All comments are appreciated.
Moderator's Note : Outbackmel ---You have a similar post in the Repairs and Maintenance section that was posted yesterday and it was still there when I last checked. Is that the one you are referring to? Leave this post here but you might want to check to see if the one that was "trashed" is still here. Thanks.
|