|
Replaced converter
Electrical lights and the furnace blower motor have been doing some strange things. After doing several tests as well as talking to the converter manufacturer, I decided the converter was on its way out and replaced it. No more problems!
However, what a pain in the butt to get to it! As near as I can figure, they brought in the frame, put on the decking, landed the converter and then built the rest of the camper! The only way to get to it was thru the equipment area just aft of the cargo bay. I had to cut one drain pipe and disconnect and remove several pieces of ducting to get to it and even with that it was a tight squeeze and an uncomfortable position to work on it.
Dave
|
Go Padres!!
Linear Mode
