|
|
04-22-2023, 08:22 AM
|
#21
|
Site Team
Join Date: Feb 2014
Location: W. Texas
Posts: 17,692
|
Quote:
Originally Posted by JTorj
I agree that it should be hard wired, but it's not. I have the correct switches engaged. When I run an electric extension out to the plug I've mentioned the water gets hot. it doesn't speak well of the builder of the trailer or quality control...
|
I don't know if I fully understand the situation yet; looks like you've updated your profile and this is a 23 model, right? Are you saying you run an extension cord from an outside outlet and PLUG the water heater into it and it works but there is no plug in the rv for it to plug into? Is there a breaker in the electrical panel labeled "WH" or some other similar designation? Where does it go/what does it control?
__________________
Danny and Susan, wife of 56 years
2019 Ram 3500 Laramie CC SWB SB 6.4 4x4 4.10
2020 Montana High Country 331RL
|
|
|
04-22-2023, 08:57 AM
|
#22
|
Site Team
Join Date: Mar 2011
Location: Gaylord
Posts: 26,996
|
The only "electric water heater wiring" that has an external 120VAC plug that I'm aware of is the "aftermarket Hott Rod" which is a replacement for the anode rod on a Suburban water heater (not recommended as it deletes anode protection) and a similar model that replaces the plastic drain plug on an Atwood water heater. Both of those have a power cord with a plug on the end.
Other than that, I'm not aware of any Suburban or Atwood water heater that's used as OEM equipment that has a power cord with a plug.....
__________________
John
2015 F250 6.7l 4x4
2014 Cougar X Lite 27RKS
|
|
|
04-23-2023, 06:35 AM
|
#23
|
Senior Member
Join Date: Mar 2014
Location: Mountain Home, Idaho
Posts: 3,013
|
Actually the newer Suburan SW12DEL series water heater ships with a conventional 120 male 3 prong plug on the end of it..
The RV has an outlet to Plug the water heater into.. look at their website and you will see the junction box and you will see a cord with a plug on it
The older SW series just used a junction box to hard wire but not with the newer units
https://suburbanrv.com/water-heating...2-gallon-tank/
__________________
2007 GMC Classic club cab 4x4 Duramax LBZ
2014 Alpine 3010 RE. 34 foot fifth wheel
|
|
|
04-23-2023, 12:52 PM
|
#24
|
Senior Member
Join Date: Sep 2019
Location: Florissant
Posts: 702
|
My Bullet's water heater plugs into an outlet box. This box is also where the 12 volt control solenoid is located, which switches the 120 volt outlet. It is a 6 gallon Dometic/Atwood. 2019 vintage
__________________
Skids
2019 Bullet 248RKS
|
|
|
04-23-2023, 04:05 PM
|
#25
|
Junior Member
Join Date: Feb 2023
Location: Swanton
Posts: 6
|
My. 2021 Cougar 368MBI has a 120 plug for the electric part of the water heater and the 12 volts that controls the gas is hard wired coming from the in command controller
|
|
|
04-23-2023, 04:59 PM
|
#26
|
Senior Member
Join Date: Oct 2014
Location: Germantown, TN
Posts: 6,332
|
Well! Come to find out I actually didn’t know every damned thing after all!
__________________
Jim in Memphis, Wife of 51 years is Brenda
2019 F450 6.7 Powerstroke
2018 Mobile Suites 40RSSA
2021 40' Jayco Eagle
2001 Road king w/matching Harley sidecar
2021 Yamaha X2 Wolverine 1000
|
|
|
04-23-2023, 06:31 PM
|
#27
|
Site Team
Join Date: Feb 2014
Location: W. Texas
Posts: 17,692
|
Quote:
Originally Posted by notanlines
Well! Come to find out I actually didn’t know every damned thing after all!
|
Nor do I obviously!! Can't imagine building an RV with a plug in water heater with no place to plug it in but there's some new quirk in most trailers from time to time.
__________________
Danny and Susan, wife of 56 years
2019 Ram 3500 Laramie CC SWB SB 6.4 4x4 4.10
2020 Montana High Country 331RL
|
|
|
04-23-2023, 08:35 PM
|
#28
|
Senior Member
Join Date: Apr 2012
Location: Portland, OR
Posts: 4,223
|
Quote:
Originally Posted by sourdough
Nor do I obviously!! Can't imagine building an RV with a plug in water heater with no place to plug it in but there's some new quirk in most trailers from time to time.
|
I just don't understand a plug in water heater at all! With the quick connect outlets in an RV, and high draw of a water heater seem like a bad idea! Must be a big time saver on the assembly line.
__________________
Russ & Paula and Belle the Beagle.
2016 Ram Laramie 3500 DRW 14,000# GVWR (New TV)
2005 Copper Canyon 293 FWSLS 32’ GVWR 12,360
Visit and enjoy Oregon State Parks
|
|
|
04-24-2023, 04:19 AM
|
#29
|
Senior Member
Join Date: Mar 2014
Location: Mountain Home, Idaho
Posts: 3,013
|
I'm gonna guess that Suburban started building the SW xxDEL series water heater with the 120 volt round cord and plug to reduce the number of issues with burnt up remote relays...
The OEM factory junction box 120 volt romex wiring has been less than stellar and by building the water heater with a male wall outlet plug it may minimize the issue..
Sloppy wiring has been seen on many units with regards to the WH electrical junction box.
The image here is from a 2021 Montana and you can see the remote relay in the junction box with a round power cord coming out and ( not in the image ) on the other end is a 120 male wall plug.
__________________
2007 GMC Classic club cab 4x4 Duramax LBZ
2014 Alpine 3010 RE. 34 foot fifth wheel
|
|
|
04-24-2023, 05:09 AM
|
#30
|
Senior Member
Join Date: Dec 2019
Location: Trinidad,TX
Posts: 975
|
My previous camper (a Forest River product) had a conventional 120 volt plug that connected to an outlet under the sink. It was actually very convenient as I used an extension cord to connect it to the 20 amp outlet on the pedestal when available or into the camper's outlet if no pedestal outlet was provided. That made it convenient on my 30 amp camper.
__________________
Woody
Cedar Creek Lake, Texas
2019 Laredo 290 SRL
2019 Ram 2500, 4x4, Cummins diesel
Andersen hitch
|
|
|
04-24-2023, 06:49 AM
|
#31
|
Senior Member
Join Date: Sep 2019
Location: Florissant
Posts: 702
|
Quote:
Originally Posted by CedarCreekWoody
My previous camper (a Forest River product) had a conventional 120 volt plug that connected to an outlet under the sink. It was actually very convenient as I used an extension cord to connect it to the 20 amp outlet on the pedestal when available or into the camper's outlet if no pedestal outlet was provided. That made it convenient on my 30 amp camper.
|
Apparently Woody knows what he is doing as he has not started a fire. I would caution others concerning the use of an extension cord for this purpose unless you know how to size the proper gage and length. Heating elements draw a lot of current and the extension cord itself acts as an additional resistor. Be careful out there!
__________________
Skids
2019 Bullet 248RKS
|
|
|
04-24-2023, 07:21 AM
|
#32
|
Senior Member
Join Date: Dec 2019
Location: Trinidad,TX
Posts: 975
|
Quote:
Originally Posted by skids
Apparently Woody knows what he is doing as he has not started a fire. I would caution others concerning the use of an extension cord for this purpose unless you know how to size the proper gage and length. Heating elements draw a lot of current and the extension cord itself acts as an additional resistor. Be careful out there!
|
I used a 12 guage cord, rated for 20 amps.
__________________
Woody
Cedar Creek Lake, Texas
2019 Laredo 290 SRL
2019 Ram 2500, 4x4, Cummins diesel
Andersen hitch
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|