|
04-15-2013, 07:45 PM
|
#1
|
Junior Member
Join Date: Apr 2013
Location: Colorado Springs, CO.
Posts: 8
|
Fresh water tank level sensors
I just purchased a 2004 Tailgator toy hauler. The wiring was torn apart from the sensors for the fresh water tank. The wires are still attached so I can see the colors, but they are not connected to the wiring harness that goes back to the gage in the trailer. Can anyone tell me what colors go to what colors on the wiring harness?
|
|
|
04-16-2013, 05:17 AM
|
#2
|
Senior Member
Join Date: Nov 2011
Location: SoCal
Posts: 1,739
|
I you get no replies, you can always go by trial and error. I've always wondered what would happen if the wiring was in incorrect order:
Does each wire control an individual gauge light? Or does each wire add to total number of lights? If it's the latter, then order wouldn't matter.
__________________
-Scott, DW, DG, DB, and DD
2011 Passport 2590BH
2009 Ford F150 SuperCrew F X4 5.4L w/Max Tow
|
|
|
04-16-2013, 05:24 AM
|
#3
|
Junior Member
Join Date: Apr 2013
Location: Colorado Springs, CO.
Posts: 8
|
I would assume that the white wire is the ground, and the other three light one light each. I just do not know what color wire go to the wires of the main harness. The main harness are different colors than the sensor wires. Hope some one knows so it would be as easy as connecting them and be done with it.
|
|
|
04-16-2013, 06:19 AM
|
#4
|
Site Team
Join Date: Mar 2011
Location: Gaylord
Posts: 26,995
|
Blackjack, If you can get to the hookup of one of the other tanks, the color code should be the same, ie: if it's red/green/black on the FW tank, it should be the same arrangement on the black tank... Just a thought on where to start piecing it back together
__________________
John
2015 F250 6.7l 4x4
2014 Cougar X Lite 27RKS
|
|
|
04-16-2013, 05:31 PM
|
#5
|
Junior Member
Join Date: Apr 2013
Location: Colorado Springs, CO.
Posts: 8
|
I had the same thought, but it looks like the other tanks wiring goes into a rubber connector that doesn't come apart, so, I can't tell where each wire is connected to what.
|
|
|
04-16-2013, 05:44 PM
|
#6
|
Site Team
Join Date: Mar 2011
Location: Gaylord
Posts: 26,995
|
Hmmmm then fill the tank above the lower sensor, touch the wire to the lower sensor to the harness wires until the bottom LED lights, then fill the tank above the middle sensor, touch that sensor wire to the remaining wires until the second LED lights, that leaves one ????
I'm just guessing, you may not even be able to get access to do it this way?
__________________
John
2015 F250 6.7l 4x4
2014 Cougar X Lite 27RKS
|
|
|
04-16-2013, 06:33 PM
|
#7
|
Junior Member
Join Date: Apr 2013
Location: Colorado Springs, CO.
Posts: 8
|
Hum, not a bad idea. If I can't get a wiring diagram, I'll try that. Thanks.
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|