|
|
07-03-2020, 01:31 PM
|
#21
|
Senior Member
Join Date: May 2018
Location: Markham, Ontario
Posts: 1,942
|
I agree with John and the fleet option. I see alot of GMC 2500 trucks for major construction companies don't come with tow mirrors, I am pretty sure with the amount of trucks they order, savings are all part of their bottom line. Probably no tow options/Equipment in them either.
__________________
Dan & Serena
2019 GMC SIERRA 2500 HD SLE
2015 Cougar X-Lite 29 RET
|
|
|
07-03-2020, 07:05 PM
|
#22
|
Senior Member
Join Date: Sep 2019
Location: Des Moines
Posts: 366
|
Quote:
Originally Posted by JRTJH
Brant,
First, thanks for asking for pictures... Somehow I missed my annual "corrosion control" on the hitch... Now you know what I'll be doing this afternoon....
Here's a few photos of the OEM hitch on my 2015 F250 diesel truck. It's my understanding that all SuperDuty models (gas or diesel) are equipped with the same receiver, but that likely isn't true with "fleet orders". Your equipment list confirms your hitch is not "the standard OEM consumer part"...
As you can see in these photos, my hitch has "3 layers". The outer is the same "reinforcement ring" as yours, the next in is the 2.5" tube and the inner is the 2" sleeve adapter.
Ratings on my receiver with the 2" sleeve in place and a 2" shank are:
Weight carrying: 6000/600
Weight distributing: 12500/1250
With the sleeve removed and a 2.5" shank, ratings are:
Weight carrying: 8500/850
Weight distributing: 19000/1900
Your receiver is "way lighter" than the OEM for SuperDuty trucks built for consumer sale, and with your trailer GVW, it looks like you're "right there at maximum capacity" which might explain why you are seeing the steel deformity. It's at the maximum limits.
|
John,
Thanks for the photos. I wonder if The models with gas get the class III? I saw another in a parking lot today, same year, same trim, same hitch. Also gas. It took all I had in me from not sliding my wdh in real quick to see if it has the same slop. Since the gas is limited to 12.5k they used a hitch to prevent people like RuffRider from overloading.
The Ford info sticker shows the hitch rated at 12.5k with a wdh so I’m not worried about overloading. I don’t like the slop though. Direct from the Reece site a class IV is $380. I’m sure I could find it cheaper if I shop around. Might be cheap piece of mind as the shank bouncing around in the receiver will cause a failure sooner than later.
__________________
Brant
2020 Ford F-350 CCLB, 7.3 gas
2022 Arcadia 3940LT
|
|
|
07-03-2020, 07:34 PM
|
#23
|
Site Team
Join Date: Feb 2014
Location: W. Texas
Posts: 17,685
|
Brantly, reckon the receiver is just not "tight" or the shank is not right? I know I had a 2" receiver once that I thought was defective but in fact the shank I was putting in it had somehow not been made with good tolerances leaving a lot of play. New one and it was tight as a jug.....?
__________________
Danny and Susan, wife of 56 years
2019 Ram 3500 Laramie CC SWB SB 6.4 4x4 4.10
2020 Montana High Country 331RL
|
|
|
07-04-2020, 05:23 AM
|
#24
|
Senior Member
Join Date: Sep 2019
Location: Des Moines
Posts: 366
|
Quote:
Originally Posted by sourdough
Brantly, reckon the receiver is just not "tight" or the shank is not right? I know I had a 2" receiver once that I thought was defective but in fact the shank I was putting in it had somehow not been made with good tolerances leaving a lot of play. New one and it was tight as a jug.....?
|
Possible. When we get home I’ll get out the calipers and see where it’s off
__________________
Brant
2020 Ford F-350 CCLB, 7.3 gas
2022 Arcadia 3940LT
|
|
|
07-04-2020, 07:44 AM
|
#25
|
Site Team
Join Date: Feb 2014
Location: W. Texas
Posts: 17,685
|
Trying to remember but seems the dimension(s) in one of the widths was just a tiny bit off but all the corners were rounded which let it just flop around inside the receiver. The new one I put in had sharp cut corners and stopped all that.
__________________
Danny and Susan, wife of 56 years
2019 Ram 3500 Laramie CC SWB SB 6.4 4x4 4.10
2020 Montana High Country 331RL
|
|
|
07-08-2020, 09:17 AM
|
#26
|
Senior Member
Join Date: Oct 2010
Location: Okanagan, BC
Posts: 916
|
Quote:
Originally Posted by cavediver
A lot of this could be solved with a tape measure.
|
So can a lot of arguments.......
__________________
2010 Cougar 30RKS
2015 GMC Sierra Max Trailer
"Drinks for 6, Dinner for 4, Sleeps 2"
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|