Quote:
Originally Posted by jasin1
Chuck is there a valve on HYD slide systems that can be shut off to isolate that slide when in the stored position? Would that help till the cylinder could be replaced?
|
Most hydraulic driven slide out systems have an IRC panel ( individual room control) .. the Alpine and Montanas with hydraulic slides have this..
This is simply individual flow control manual open/close valves so that the OP can selectively open/close a specific hydraulic slide out.. It just shuts off the fluid flow..
There is also ONE Hydac valve on the Lippert hydraulic slide sytem that controls fluid flow be electrically opening or closing the valve to allow fluid to flow to ALL hydraulic slide cylinders...
in the last 8 years I have had my BR slide out creep open TWICE while sitting stored here at the house during the winter months.. The slide crept open about 3 inches or so
Simply cycling the slide in and out a few cycles corrected my issue... Air in system most likely plus sitting for four months..
I have never had any of the 3 hyd slide outs creep opeing during towing..