Possible bad front leveling jack.
Working I my rig today and I’m finding the front left jack acting up. When raising front of rig to disconnect left front jack stopped at about 7 inches of movement. Right keep going and no errors at lippert control panel. I stooped and lowered back onto the truck. I then raised the pads all the way up and used the Drop Front Jack option on the controls panel. Both sides extended to over 24 inches before out of stroke message. I then did a retract all to rehone all jacks. Attempted another disconnect. Lowered pads 12 open holes and attempted again. Press Lower Front Jacks. Jacks lowered and stopped after contact with ground. Panel read Jack down. The pressed Front to raise higher for disconnect. Left fron again stooped but right kept going.
I suspect jack is bad. Any one disagree?
__________________
|