Should be the same as the other units you have done. My guess for the bypass is it would be located behind an interior panel at the back of your water heater. Usually you need to remove 2 screws to access the are and there are 3 valves to manipulate or just one depending on the set up. If you have questions after locating the back of the water heater take a pic and post that and we should be able to help with the valve orientation.
__________________
R.J. and Ginger
2019 Ram 3500 6.7 HO, Aisin Trans 3:73
Reese Goosebox
2019 Sandpiper 379FLOK
|