Bumper rack

[travelin texans]

I think I'd get the offset hitch insert & raise it at least to the top of the bumper or risk dragging it at every fuel stop.

I also agree with Danny, add a couple straps to stabilize it flopping back & forth.

[flybouy]

Do us a favor and post a picture back to this thread WHEN it seperates or twists the bumper. Good luck.

[jasin1]

don’t know what the fuss is all about…couple of straps..good to go ..maybe attach the straps to the air conditioner

[Chrispl36]

It doesnt move much. I used the rattle hitch clamps on the pin connection.

[Chrispl36]

Originally Posted by travelin texans

I think I'd get the offset hitch insert & raise it at least to the top of the bumper or risk dragging it at every fuel stop.
Attachment 40014
I also agree with Danny, add a couple straps to stabilize it flopping back & forth.

I did go back with that offest and rattle clamps on both receiver coneections . One step further i offset the spare tire and moved the rack as close to the bumper as possible. Had to drill new holes in the racks receiver.

[Chrispl36]

Originally Posted by sourdough

Not trying to be ugly but that's a nice generator to go flying down the highway. Did you just put that rack in the receiver and then just let it wiggle and flop? I didn't see any signs of additional supports.

It doesnt move much. I used the rattle hitch clamps on the pin connection.