Polishing

[Geoff B]

Hi all
Tearing hair out. 2012 keystone Springdale. I’m try to bring up a lack lustre paint job. Not damaged or looking really bad. I’ve got Mcguiars 50 plus I’ve tried a cutter first on parts. I’m getting a very streaky swirley finish. Just above the pin box is stunning. The rest is not so including a bit on the side…. HELP !! 🤣🤣

[flybouy]

Is it paint or Filon? Filon is like the deck of a boat. If you use an agressive cutting compund then you will need to go over it with a medium and then a fine cut ciompund, then a loliosh and nthen a sealer or wax, You have a lot of work ahead of you. If you are using a DA polisher be careful not to "burn" the surface by staying in one spot too long.

[Geoff B]

Originally Posted by flybouy

Is it paint or Filon? Filon is like the deck of a boat. If you use an agressive cutting compund then you will need to go over it with a medium and then a fine cut ciompund, then a loliosh and nthen a sealer or wax, You have a lot of work ahead of you. If you are using a DA polisher be careful not to "burn" the surface by staying in one spot too long.

Cheers… thanks for your input