|
08-06-2016, 06:48 AM
|
#1
|
Junior Member
Join Date: Mar 2015
Location: Brownsville, Texas
Posts: 6
|
Lippert Ground Control 3.0
When getting ready to hook up fifth wheel i was surprised to find that the small screen was blank. Turn the system on but nothing shows up on the little screen. Believe I can get the jacks up manually. but would be nice to see the menu again. Any ideas?
|
|
|
08-06-2016, 07:03 AM
|
#2
|
Site Team
Join Date: Jul 2014
Location: Modesto
Posts: 20,317
|
Lippert Ground Control 3.0
Does the LED "power" light come on? Do you have any functions at all?
Can't say anyone here has encountered a blank screen, so I don't have a quick answer, sorry.
__________________
2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.
Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
|
|
|
08-06-2016, 08:44 AM
|
#3
|
Junior Member
Join Date: Mar 2015
Location: Brownsville, Texas
Posts: 6
|
Yes it does light up but no words. also the manual seems to be working.
|
|
|
08-06-2016, 06:34 PM
|
#4
|
Site Team
Join Date: Jul 2014
Location: Modesto
Posts: 20,317
|
If you don't get any information by Monday, I will try to find out what we as dealer techs can gather.
__________________
2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.
Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
|
|
|
08-06-2016, 07:35 PM
|
#5
|
Senior Member
Join Date: Dec 2015
Location: Ocean Isle Beach
Posts: 1,431
|
Remove the control panel, unplug it in the rear and plug it back in ~~ so I was told by a tech if that should ever happen.
__________________
2022.Montana 3855 BR
2019 F350 6.7 4X4 DRW
|
|
|
08-07-2016, 03:41 PM
|
#6
|
Member
Join Date: Jan 2014
Location: Ohio
Posts: 58
|
Quote:
Originally Posted by CaptnJohn
Remove the control panel, unplug it in the rear and plug it back in ~~ so I was told by a tech if that should ever happen.
|
This works, reboots the panel.
|
|
|
08-09-2016, 04:53 AM
|
#7
|
Junior Member
Join Date: Mar 2015
Location: Brownsville, Texas
Posts: 6
|
Thanks I will give this a try as soon as I can figure out how to remove the control panel.
|
|
|
08-10-2016, 06:37 AM
|
#8
|
Member
Join Date: May 2014
Location: Ashland, Virginia
Posts: 46
|
Look in your front storage area. You should see a control head located on the roof on the center line of the trailer. There should be a white plug with one red wire attached. Unplug this plug for up to 45 minutes. Once plugged in, the display may come back. If it does not come back, time for a new display panel. It worked for me the first couple of times. Now, I get nothing. A new display panel cost around $168.00. Even though I got one month of dealer warranty left, going to change it out myself.
__________________
2015 Montana 3721 RL
2015 Ram 3500 6.7 Cummins Dually
Previous: 2014 Cougar 327 RES High Country
2014 Ram 2500 HD 6.7L Cummins, 2002 Coleman Popup, 2012 Wildwood 24RB, 2014 Outback 298RE
|
|
|
08-11-2016, 04:29 AM
|
#9
|
Member
Join Date: Apr 2014
Location: Louisiana
Posts: 54
|
I just had the same problem. Ordered a new panel and will install when it arrives. I had read that when you plug into your land line electrical connection. If you don't tighten that connection all the way it will ground and damage the panel.
__________________
2015 Ford F250 Platinum
2013 Keystone Fuzion FZ 310
2016 Road Glide Special
|
|
|
08-11-2016, 02:29 PM
|
#10
|
Senior Member
Join Date: Jul 2012
Location: NW Ohio
Posts: 105
|
Quote:
Originally Posted by Jeff and Rita
I just had the same problem. Ordered a new panel and will install when it arrives. I had read that when you plug into your land line electrical connection. If you don't tighten that connection all the way it will ground and damage the panel.
|
I highly doubt that could have any effect on it, seeing as how the Ground Control system works off of 12 volts DC, not 120 volts AC.
__________________
2017 F350 CC LB SRW 6.7
2015 Montana HC 305RL
|
|
|
08-16-2016, 06:07 AM
|
#11
|
Senior Member
Join Date: Apr 2016
Location: carver ma
Posts: 556
|
had my 1st problem turned on power to level systom said lf jack with a beep got all hocked up once hone turn systom on now says rr jack error my up arrow and down dont work may be un plug ir and see if resets this is on a 2016 cougar 5th wheel 3mo old any one else have this problem
|
|
|
08-16-2016, 06:52 AM
|
#12
|
Site Team
Join Date: Jul 2014
Location: Modesto
Posts: 20,317
|
Just go into manual mode. Lower the jacks at least 8", and then hit retract all. It should clear the error.
Sent from my iPhone using Tapatalk
__________________
2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.
Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
|
|
|
08-30-2016, 03:46 AM
|
#13
|
Senior Member
Join Date: Apr 2016
Location: carver ma
Posts: 556
|
worked out great thanks for the info
|
|
|
|
Thread Tools |
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|