Sanitizing fresh water tank with an Anderson Valve

[LZScout]

My apologies if this has been answered before but I've searched and can't find the answer. I have the Anderson 4-way selector valve in my waterworks area. It functions this way:

City – Pressure feed fixtures from 3/4" hose connection on backflow preventer.

Normal – Pump from the on-board tank to the fixtures using on-board pump.

Tank – Pressure fill the tank from 3/4" hose connection at backflow preventer.


Sanitize/Winterize – Draw in sanitizers and winterizing fluids from a bucket directly to fixtures utilizing the on-board pump. It does not pump to the water tank.

I need to know how to add a sanitizing solution to my water tank?


Sent from my iPhone using Tapatalk

[labs4life]

Could you use one of the hand held pumps to get it in there. They are pretty inexpensive and should solve your issue.

[LZScout]

Thanks Labs4life. I went to Home Depot and bought a drill pump:

http://m.homedepot.com/p/200-GPH-Dri...P-1/203449537/

Used it to pump the bleach solution into the tank in no time at all. I wish all my RV challenges were that easy to solve.


Sent from my iPhone using Tapatalk