|
04-02-2015, 07:43 AM
|
#1
|
Senior Member
Join Date: Mar 2015
Location: Grays Creek, NC
Posts: 334
|
Shower door seal, top/bottom part name?
I have a torn shower door seal on the bottom of my shower door, anyone know what these are called? Their made of a soft rubber.
If anyone has had to replace this could you give me the name of what a seal like this is called, and how they install.
I think I could just pull it and it will pop right out but until I find a new one I don't want to make it worse while we are in it next week during spring break.
If they do just pull out I suppose for know I could remove the top one and put it in the bottom as that's where it leaks now.
Here's our floor plan so you'll know what style shower we have.
__________________
2018 Chevy LTZ 3500 4X4, DRW, QC, 6.6L TD, Factory trailer prep, Andersen Aluminum hitch
2015 Raptor 332TS 38' Toyhauler, Maxxis M8008,Splendide 2100XC, Winegard RoadTrip Mission satellite dish, King sleep number bed
Retired Army, 22yrs
|
|
|
04-02-2015, 08:33 AM
|
#2
|
Senior Member
Join Date: Oct 2013
Location: B.C
Posts: 1,399
|
I just replaced the bottom one with the top one as the top one doesn't do much.
They just slide out, sorry but I don't know the name of them.
__________________
2010 Keystone Cougar 25 RL.
|
|
|
04-02-2015, 08:43 AM
|
#3
|
Senior Member
Join Date: Mar 2015
Location: Grays Creek, NC
Posts: 334
|
Quote:
Originally Posted by Steve S
I just replaced the bottom one with the top one as the top one doesn't do much.
They just slide out, sorry but I don't know the name of them.
|
Thanks, I'll try that. And then at least I can take the torn one to lowes or camper world so they can see what I'm talking about.
__________________
2018 Chevy LTZ 3500 4X4, DRW, QC, 6.6L TD, Factory trailer prep, Andersen Aluminum hitch
2015 Raptor 332TS 38' Toyhauler, Maxxis M8008,Splendide 2100XC, Winegard RoadTrip Mission satellite dish, King sleep number bed
Retired Army, 22yrs
|
|
|
06-27-2016, 01:19 PM
|
#4
|
Senior Member
Join Date: Dec 2013
Location: Great Falls, MT
Posts: 322
|
I know this is an older post, but my lower shower door seal is torn also, just wondering if you were able to find a replacement and where? Thanks...
__________________
2016 Alpine 3601RS
6500 Onan
2016 Chevrolet 2500 LTZ/Z71
|
|
|
06-27-2016, 01:27 PM
|
#5
|
Senior Member
Join Date: Sep 2014
Location: Auburn, Ky
Posts: 147
|
We had the same thing, I realized that the shower door was crooked, so had it rehung and had that part replaced as well. Wish I woulda asked the name of the part, besides shower door seal.
Sent from my iPad using Tapatalk
__________________
TV: 2014 Chevrolet Silverado 1500 4WD (Big Red)
Toy: 2019 Flagstaff V-Lite 30WFKSV (B**** Magnet IV)
|
|
|
06-27-2016, 01:43 PM
|
#6
|
Member
Join Date: Oct 2014
Location: Campbellsville, Ky.
Posts: 37
|
|
|
|
06-27-2016, 02:20 PM
|
#7
|
Senior Member
Join Date: Dec 2013
Location: Great Falls, MT
Posts: 322
|
But not a box home store type of product? I'll need to get one from my dealer?
Sent from my iPhone using Tapatalk
__________________
2016 Alpine 3601RS
6500 Onan
2016 Chevrolet 2500 LTZ/Z71
|
|
|
06-27-2016, 03:22 PM
|
#8
|
Senior Member
Join Date: Apr 2014
Location: Minnesota
Posts: 779
|
If it's the same kind of seal as on our shower door, I'm trying this one. We should get it in about a week and hopefully it fits. Measurements are the same
https://www.amazon.com/Two-Pronged-S...oor+seal+sweep
__________________
--Lynette
2019 F-350 diesel 4x4 CC LB DRW, not the mom taxi anymore...
2021 Alliance Paradigm 340RL
2016 F-350 diesel 4x4 CC LB SRW, mom taxi - sold
2014 Cougar XLite 28RDB - sold
|
|
|
06-27-2016, 04:44 PM
|
#9
|
Senior Member
Join Date: Feb 2014
Location: NJ
Posts: 311
|
I believe it's called a bottom vinyl door sweep. Problem being there are several different configurations from different manufacturers.
__________________
2014 F250 SWD 6.7 CC
2014 Alpine 3500RE
|
|
|
07-08-2016, 06:27 PM
|
#10
|
Senior Member
Join Date: Apr 2014
Location: Minnesota
Posts: 779
|
Just an update for anyone searching in the future. The shower seal/ sweep that I bought from Amazon in my previous post came a few days ago. It's a perfect fit for the torn sweep I took out of our neo-angle shower. Just had to cut it down for length. So, if you have a torn sweep with the following profile, this one works great.
__________________
--Lynette
2019 F-350 diesel 4x4 CC LB DRW, not the mom taxi anymore...
2021 Alliance Paradigm 340RL
2016 F-350 diesel 4x4 CC LB SRW, mom taxi - sold
2014 Cougar XLite 28RDB - sold
|
|
|
07-09-2016, 08:08 AM
|
#11
|
Senior Member
Join Date: Jan 2014
Location: Tidewater Area Virginia
Posts: 1,271
|
Quote:
Originally Posted by vampress_me
Just an update for anyone searching in the future. The shower seal/ sweep that I bought from Amazon in my previous post came a few days ago. It's a perfect fit for the torn sweep I took out of our neo-angle shower. Just had to cut it down for length. So, if you have a torn sweep with the following profile, this one works great.
|
Thanks! I took the one out of the top and put it in the bottom. Now I can replace the top one, which I don't really need anyway, or have a spare.
Reposting your link to product for future reference https://www.amazon.com/Two-Pronged-S...oor+seal+sweep
PS - I laugh everytime I see your handle.
__________________
2014 Raptor RP300MP w/ Rear Patio Party Deck, Folding Side Ladder, 6 Point Level Up, Carlisle Radial Trail HDs
2004 2500HD D/A CC SB - TTT Mirrors, Prodigy BC, 18K Pullrite Superglide, NEW Fuel Injectors 11/2015 (ouch)
|
|
|
07-09-2016, 09:49 AM
|
#12
|
Junior Member
Join Date: Sep 2014
Location: Houston, Tx.
Posts: 21
|
Shower door sweep
Do you remember the part number from Amazon?
__________________
2014 Ford F-250
2014 Cougar 280RLS
|
|
|
07-10-2016, 10:26 AM
|
#13
|
Senior Member
Join Date: Apr 2013
Location: Ontario, Canada
Posts: 102
|
__________________
Retired Air Traffic Controller 38 yrs
2021 Montana 3780RL
|
|
|
03-31-2017, 11:58 AM
|
#14
|
Site Team | Emeritus
Join Date: Jan 2014
Location: Western PA
Posts: 2,732
|
Late better than never
Quote:
Originally Posted by vampress_me
Just an update for anyone searching in the future. The shower seal/ sweep that I bought from Amazon in my previous post came a few days ago. It's a perfect fit for the torn sweep I took out of our neo-angle shower. Just had to cut it down for length. So, if you have a torn sweep with the following profile, this one works great.
|
As a late follow up, finally got a chance to install the new sweep, whose part number is provided in a couple of posts, and it works fine. It should be noted that the new sweep is slightly larger and more rigid than the original sweep which is a little more flimsy. After consulting with Vampress_me, who also used this part, you have to push much harder to snap this new one in place. Again this replacement appears to be much better quality that the original. and I would expect this one to last much longer.
__________________
2013 RAPTOR 300MP w/Rear Patio Deck NO Folding Side Ladder
2013 Silverado 3500HD LTZ CC LB 4X4 DRW
Duramax 6.6L Turbo Diesel; Allison Trans
Reese 20K; Carlisle Radial Trail RH/HD; TPMS (12 Tires)
Veteran
PSU (GO LIONS)
|
|
|
09-20-2019, 05:17 PM
|
#15
|
Junior Member
Join Date: May 2019
Location: Portland
Posts: 3
|
Upgrade replacement shower door sweep
Just thought I'd share my solution to the shower door sweep that kept tearing off every 3 -4 trips on our 2018 Passport. The one shown above from Amazon is the OEM part. It's made too thin. I found a solid 1/2" wide sweep online at 2 sources. I purchased the first one from http://www.crlaurence.com part # p500hw. It's 95" L ans $12.052 plus shipping.
I used a pair of tin snips to cut it but you could use a pair of scissors or utility knife. I also measured my glass door diagonally and found it to be out of square. Others had mentioned the hinge needed to be adjusted but there is no adjustment in this door. I lifted up on the bottom corner of the door and the frame shifted almost a 1/4 ". This squared the door to the frame much tighter. The reveal gap at the top and bottom of the door is much more even. The sweep won't have to bend as much to close now.
I did have to trim the inside of the bottom sweep a bit because the inside flap on the dual sweep was a bit to stiff. I just ran a razor blade along the inside with the door closed to remove about 1/8". I doesn't need to be tight. After 8 showers there were no leaks and it only had a couple of drips on the floor after I opened it up. We always squeegee off the glass so there isn't much on there anyway.
http://www.crlaurence.com part # p500hw. It's 95" L and $12.52 plus shipping.
http://www.crlaurence.com/crlapps/sh...&ModelID=60599
swisco 10-343 47" L $12.44 + shipping.
https://www.swisco.com/1-2-frameless...ardware/10-343
|
|
|
09-22-2019, 04:50 AM
|
#16
|
Senior Member
Join Date: Aug 2016
Location: Rincon
Posts: 192
|
Shower door seal......Amazon has several different styles/shapes available or just google it and you will get lots of types available
__________________
2017 Ram 3500 CC Cummins
2011 Keystone Laredo 266 RL
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|