Ok, so I realized why the trailer has a bad habit of rocking back and forth. I will go out and routinely find that the stabilizer jacks need to be re-tightened (screwed down) as they become very loose and not connected to the wood blocks I have on the ground.
Look at the picture below. It appears as though Keystone is not bolting the stabilizer jacks directly to the trailer frames. All other trailers that I have looked at have not used this system.
They have a "L" bracket mounted to the frame and then the jacks mounted to the bottom of the "L" bracket. This causes an incredible amount of movement while inside the trailer (side to side movement, forward / backwards seems ok).
Anyone else having this issue? Any resolution?
__________________
Bobby
2021 Nights Camped 55
2021 GD Reflection 150 260RD (Current)
2018 Keystone 24RKPR (Previous)
2016 Ram 2500 Tradesman CTD
|