Help finding light fixture

[notanlines]

Okay, so who knew that the lens cover twisted off rather than snapping off like the other three. Anybody have an idea of the stock number or supplier of these?

[PARAPTOR]

Originally Posted by notanlines

Okay, so who knew that the lens cover twisted off rather than snapping off like the other three. Anybody have an idea of the stock number or supplier of these?

Oh Yes My favorite light, still have not got that dam cover off. We have a couple posts on this light, how can I forget this one. I will add the links here when I find them including part number for the light. Fun yet to come getting the enclosure out of that word work

ADDED: picture/part number

ADDED: previous post http://www.keystoneforums.com/forums...ghlight=vanity

[notanlines]

Bill, that is exactly the fixture. Two of them pop off with a pocket knife. The one I broke will come off if you twist it counterclockwise about ten degrees. I am about to post a picture of the backside of the lens cover for you.

[notanlines]

Let me do it this way instead:

[notanlines]

Yep, just ordered one. Fifteen for the light and nineteen for the shipping. And they did all this without a pistol! Thanks, Bill!

[PARAPTOR]

Originally Posted by notanlines

Let me do it this way instead:

Yeap that is it. So here goes, I have only two of these, one in ceiling portion of the entertainment center, other one again in woodwork on top edge of slide. Think about two years ago looked up at one in entertainment center and it looked like lens was starting to come off. When I got a ladder to get up there noticed lens was very hot and the tab on one side was broke. That is when I started looking for a replacement (previous post picture). Since we were leaving I just got some Velcro and stuck it up there and off we went. Still a little concerned how hot that was I decided to put an led in there. I put an led in there and started thinking 10k-30k hours , got some super glue put a little dot on side tab was broke and pushed it up there, been up there since (for the next guy to change led).

The other one I have tried a few times to get the lens off I think as a form of therapy . Looks like they crammed the light housing into this hole not to ever be removed again. So it still has the halogen bulb in it, although good thing is that only a few know where the switch is so really never turned on. Switch in the slide corner almost behind couch, ????? Also concluded this light is there to stay and for the next guy.

That is my story, Oh by the way I would suggest putting an led in there since you are playing with it and got the lens off

[canesfan]

Originally Posted by notanlines

Okay, so who knew that the lens cover twisted off rather than snapping off like the other three. Anybody have an idea of the stock number or supplier of these?

I did. I posted about that very subject about a month or so ago. Sorry you missed that post. All of mine twist off. I must have gotten the "new, improved" versions.