|
11-28-2013, 03:36 PM
|
#1
|
Senior Member
Join Date: Sep 2013
Location: Upland, CA
Posts: 425
|
New Access Panel for converter, water pump, bypass for waterheater
So I had to get to the converter a couple of weeks ago, and what a pain. So I improved the access. Instead of removing the whole four foot panel to access these items I made a new one and in it I added a hatch, making the whole process much easier. The last thing I'm going to do which is not in the pictures is add the same carpet to the panel.
__________________
2015 Four Winds Super C, Class C Motorhome
4 - 100w mono solar panels with MPPT40 to charge four 6v batteries with 440amp hours.
Progressive Industries HW50c surge protector
1800 / 3600 inverter with auto transfer switch,
The bosses: My wife and two Labradoddles 80 lbs each
|
|
|
12-06-2013, 04:52 PM
|
#2
|
Member
Join Date: Feb 2012
Location: Ma-Me-O Beach, Alberta
Posts: 81
|
Quote:
Originally Posted by Yosemitebob
So I had to get to the converter a couple of weeks ago, and what a pain. So I improved the access. Instead of removing the whole four foot panel to access these items I made a new one and in it I added a hatch, making the whole process much easier. The last thing I'm going to do which is not in the pictures is add the same carpet to the panel.
|
Yes, it is indeed a serious pain in the keester to work on the water pump and associated water lines. I was in the basement for an hour today trying to isolate and correct why the pump is sounding so loud all of a sudden. No joy in discovering the problem and man is that thing NOISY! We wouldn't mind a followup on your project and how you carpet the rest of the interior and so on. I am going to tidy ours up and get some hooks and so on in there so it is easier to organize. Good info on this forum about organizing the basement!
Cheers!
Mike and Carol
__________________
Regretfully SOLD as not enough truck for our new to us RV 1999 Dodge RAM 2500 SLT
Acquired 2017/05/05 - 2012 F350 Lariat CC SRW,
RV - 2008 Fleetwood REGAL 325RKS
Carol, My wonderful wife of 41 years
Kenzie Schweenie Tod, our furry faced Shih 't n Dash
|
|
|
12-06-2013, 06:22 PM
|
#3
|
Senior Member
Join Date: Sep 2013
Location: Upland, CA
Posts: 425
|
I would be happy too,I'll be working on it again on Monday and hope to finish that project up. I should have mentioned that I also moved the converter ninety degrees too so I could access the fuses if need be. And while I had it all open I marked every hose as to what it does.
__________________
2015 Four Winds Super C, Class C Motorhome
4 - 100w mono solar panels with MPPT40 to charge four 6v batteries with 440amp hours.
Progressive Industries HW50c surge protector
1800 / 3600 inverter with auto transfer switch,
The bosses: My wife and two Labradoddles 80 lbs each
|
|
|
12-07-2013, 04:10 AM
|
#4
|
Senior Member
Join Date: Sep 2009
Location: North Carolina
Posts: 1,037
|
Good mod. I spent a day in mine to get the water bypass kit installed. I had to remove the whole large panel. I have made a few adjustments to access mine now, but really like this mod. Carpet onthe wall never thought of that? thanks
randy
PS i will be following this thread to see what else you do!
__________________
Randy "Camp On"
2011 Cougar 327RES
2014 Ford F-350, 6.7L 4X4, CC, SRW
|
|
|
12-08-2013, 08:04 AM
|
#5
|
Senior Member
Join Date: Apr 2013
Location: Haymarket, VA
Posts: 382
|
I've had the flat panel off (six screws) and that uncovers the converter. The water pump seems to be behind the angled part and that's sheet metal on our Monty. The metal seems to be all one part with the convenience panel. I'm going to have to take it apart sometime after it warms up since I really want to quiet the pump some. Might make a wood hatch in the metal - I wouldn't mind if it stuck out a little. Thanks for the idea!
__________________
'06 F350 Lariat turbo diesel dually, Curt 20k, Softopper, Aerosheld, coolant filter, air bags
'10 3665RE Hickory, wet bolts, Trimetric battery monitor, 4 100w panels & Morningstar TS-45, still tweeking!
|
|
|
12-08-2013, 01:50 PM
|
#6
|
Senior Member
Join Date: Sep 2013
Location: Upland, CA
Posts: 425
|
OK, so today I finished the passenger side panel I had left, the one that has the power, cable, and light in it. I didn't like how low the light was so I raised that and the other items as well. There are two large #10 pan head screws in the bottom of this panel that have to go back. They tie in this wall brace to the frame. Tomorrow I'll carpet the whole wall to match the rest of the basement.
__________________
2015 Four Winds Super C, Class C Motorhome
4 - 100w mono solar panels with MPPT40 to charge four 6v batteries with 440amp hours.
Progressive Industries HW50c surge protector
1800 / 3600 inverter with auto transfer switch,
The bosses: My wife and two Labradoddles 80 lbs each
|
|
|
12-09-2013, 01:56 PM
|
#7
|
Senior Member
Join Date: Sep 2013
Location: Upland, CA
Posts: 425
|
OK, so here it is, my final pictures of the project. That's it, I've got to start loading now, running out of time
__________________
2015 Four Winds Super C, Class C Motorhome
4 - 100w mono solar panels with MPPT40 to charge four 6v batteries with 440amp hours.
Progressive Industries HW50c surge protector
1800 / 3600 inverter with auto transfer switch,
The bosses: My wife and two Labradoddles 80 lbs each
|
|
|
12-12-2013, 04:58 PM
|
#8
|
Senior Member
Join Date: Feb 2011
Location: full timer
Posts: 176
|
I like it. Now maybe I can start next week. Just did the converter, wish I had done this first.
__________________
2008 Ram 2500 Quad Cab Longbed 6.7 Cummins
2011 Cougar 318 SAB
|
|
|
12-13-2013, 08:47 PM
|
#9
|
Senior Member
Join Date: Dec 2013
Location: Oklahoma
Posts: 186
|
Nicely done. Very clean.
|
|
|
12-14-2013, 04:57 AM
|
#10
|
Member
Join Date: Jun 2010
Location: NW Alabama
Posts: 84
|
Nice. Clean and professional job. I don't even know where my pump is and won't mess with it until I have to (not always the best plan, I know).
But I do like the idea of and outlet under there, plus a light on the driver's side.
|
|
|
12-18-2013, 08:03 AM
|
#11
|
Senior Member
Join Date: Sep 2013
Location: Mishawaka, Indiana
Posts: 238
|
My pump is quiet at times, yet other times when it gets a little air in the lines it will bellow like there is no tomorrow. I'm going to remount on big rubber feet so the shock is not reverberating throughout the entire camper.
I like the idea of an entry panel, but I think I'm going to look at making it slide rather than pivot up.
__________________
Roger and Dawn
Mishawaka, Indiana
2013 Cougar 280RLS / 2012 Silverado 2500HD Duramax/Allison
2001 Wrangler (Moab Rock Crawler) / 2008 Can Am Outlander 400 4x4
|
|
|
01-20-2014, 09:17 PM
|
#12
|
Senior Member
Join Date: Sep 2013
Location: Upland, CA
Posts: 425
|
Quote:
Originally Posted by slider
Nice. Clean and professional job. I don't even know where my pump is and won't mess with it until I have to (not always the best plan, I know).
But I do like the idea of and outlet under there, plus a light on the driver's side.
|
Yep, after my last trip north for almost 3 weeks, I took your idea and made it practical, added a light to the driver side as well, and made the switch on either side turn on both lights sort of like double pole double throw switch, except in a rather small rocker switch configuration.
__________________
2015 Four Winds Super C, Class C Motorhome
4 - 100w mono solar panels with MPPT40 to charge four 6v batteries with 440amp hours.
Progressive Industries HW50c surge protector
1800 / 3600 inverter with auto transfer switch,
The bosses: My wife and two Labradoddles 80 lbs each
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|