No Heat

[Jeremym27]

I bought a new (to me) 2012 Keystone Passport Ultra Lite 3220BH and set it up at my campsite.

Everything works fine, except that I have no heat. I know the propane is on because the stove burners work.

I'm guessing that this is a pilot light issue, but am not positive.

Can anyone provide some direction as to how to light the pilot light and/or other potential solutions?

[Bluewater]

Think I'd check the thermostat operation and settings first.

[HappyCamperMN]

Originally Posted by Bluewater

Think I'd check the thermostat operation and settings first.

That's a good place to start. AFAIK, there shouldn't be any sort of standing / manually lit pilot light.

Also, do you know where the furnace in your unit is? Do you hear any noises coming from it? Normally there should be a fan that starts up prior to any ignition attempt.

[Festus2]

Jeremy -
As previously noted, there is nothing to light - no pilot to look for. I'd also check your thermostat to make sure it is set to AUTO and that the other settings are correct.

[GaryWT]

Check your fuses and circuit breakers. When you turn the heat on and move the thermostat up, do you hear anything. The burner should try to light I think 3 times and if no gas it will shut down. If you hear the fan and clicks then it is a gas issue, if you hear nothing it is an electric issue or thermostat issue I would think.

[Jeremym27]

Thank you for the responses, I really appreciate it.

I have confirmed that all of the fuses are good and working.

On my model there are three thermostat settings: Off, Heat, Cool.

When I set it to Heat and put the setting at a higher temperature than it currently is in the camper I don't hear any noises or anything coming on.