SolarFlex 200 PV disconnect

[DnlMln]

Hi everyone,

I'm looking for the PV disconnect switch (or fuse) between the 200W PV panel and the Victron MPPT 75/15 controller.

I have a 2022 Passport with the SolarFlex 200 package.

Is there a breaker and/or fuse between the 200W panel and the Victron MPPT controller?

If so, where is it?

A detailed wiring diagram for the 2022 Passport would also be great but I'm not holding my breath.

Thanks

[travelin texans]

Originally Posted by DnlMln

Hi everyone,

I'm looking for the PV disconnect switch (or fuse) between the 200W PV panel and the Victron MPPT 75/15 controller.

I have a 2022 Passport with the SolarFlex 200 package.

Is there a breaker and/or fuse between the 200W panel and the Victron MPPT controller?

If so, where is it?

A detailed wiring diagram for the 2022 Passport would also be great but I'm not holding my breath.

Thanks

If you hold your breath you will die! You won't get or find schematics for any systems for most any of Thor products, which Keystone is only one of them.

[chuckster57]

Welcome to the forum

If there is a fuse/circuit breaker, as a rule it’s on the positive cable AFTER the controller and before the battery. Yours might be in the “giggy box”, located on the frame near the battery.

[tmm004]

Victron mppt 75-15 controller is blue tooth compatible. Check for the app. You can turn controller on or off with app. Who would have thought you could turn it on or off with your phone. The machines are taking over!!!! lol

[tmm004]

This helps understand Victron charge controller.

https://www.youtube.com/watch?v=UPJbtmNhVOk

[RJS3791RD]

I have a 2022 Montana. On my controller, on the left end of terminal block, there is a 20 amp plastic fuse. When I pull that fuse, my controller goes dark. I hope this helps.