Cougar 364BHL Auto Level

[Jbro]

I have the 4 point electric auto-leveling jacks on my trailer. Despite a successful auto-level when I placed it on a seasonal site, the trailer is now very slightly pitched forward. I'm guessing that despite prepping the ground under the jacks with pea gravel and blocks, the front sunk ever so slightly more than the rear in the "softish" ground at my site.

In any case, I want to auto-level again. The manual says that when starting the auto-level process, the front must be higher than the rear. Do I just lift the front jacks a couple of inches, and then press auto-level? (The manual and the videos I find online all start with the premise that you have just unhooked from the hitch, in which case the front is naturally already higher.)

[chuckster57]

The front only needs to be higher if your going to use auto hitch height. Your ok to just turn the system on and hit auto level.

[Jbro]

Thank you!

[travelin texans]

Or just go to "manual" & raise the front.