Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
 

Go Back   Keystone RV Forums > Keystone Fleet | Keystone RV Models > Toy Haulers
Click Here to Login

Reply
 
Thread Tools Display Modes
 
Old 08-02-2021, 04:09 AM   #1
Tiko433
Junior Member
 
Join Date: Aug 2021
Location: Chesapeake
Posts: 6
Raptor 352 questions

In a few weeks I’m picking up a 2021 Raptor 352. When I looked at it, I didn’t look closely at the hold down points in the garage. It doesn’t have the Etrack . It has the round tie down points. My question is what try of hook will work with them ? Do they pop up or do I need a tie hook that will fit inside the tie down. I want to buy the tie down that loop around the tire of a golf cart and a RZR.

2nd question
I need to buy sewer lines, what size lines to I need ? I know I have to use a “Y” then run to a drain. Should I use 3 20ft lines ? Just looking to see what everyone is using.
Tiko433 is offline   Reply With Quote
Old 08-02-2021, 04:35 AM   #2
chuckster57
Site Team
 
chuckster57's Avatar
 
Join Date: Jul 2014
Location: Modesto
Posts: 20,235
The rings should lift up, they lay flat for storage. All RV seeer hoses are 3”, length will depend on how far from the dump you are. A pair of 20’ before the Y should be plenty, then I would say another pair of 20’.
__________________

2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.

Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
chuckster57 is offline   Reply With Quote
Old 08-04-2021, 05:31 PM   #3
Dan Lockwood
Senior Member
 
Join Date: Sep 2019
Location: O'Fallon
Posts: 209
Hello,

If they're like my '12 Raptor, which I believe they are by your description, they do NOT lift up, but have a bar in the middle that you "hook" to.

The tie downs are welded to the center main steel girder that runs through the garage and welded to the top of the two outside "I" beams that make up the RV frame rails.

Is this what you have?
Attached Thumbnails
Click image for larger version

Name:	IMG_9306.jpg
Views:	56
Size:	245.4 KB
ID:	35112  
__________________
Dan
2012 Keystone Raptor 395LEV
2021 Ford F-350 King Ranch DRW 6.7 Diesel
'09 Harley CVO Road Glide
'76 Harley FLH Shovelhead
Dan Lockwood is offline   Reply With Quote
Old 08-05-2021, 02:50 AM   #4
Tiko433
Junior Member
 
Join Date: Aug 2021
Location: Chesapeake
Posts: 6
Thanks Dan
No they are round … I don’t have a picture. That should have put a truck system in it
Tiko433 is offline   Reply With Quote
Old 08-19-2021, 06:03 PM   #5
MathewB
Junior Member
 
Join Date: Aug 2021
Location: Salt Lake City
Posts: 1
Quote:
Originally Posted by Tiko433 View Post
In a few weeks I’m picking up a 2021 Raptor 352. When I looked at it, I didn’t look closely at the hold down points in the garage. It doesn’t have the Etrack . It has the round tie down points. My question is what try of hook will work with them ? Do they pop up or do I need a tie hook that will fit inside the tie down. I want to buy the tie down that loop around the tire of a golf cart and a RZR.

2nd question
I need to buy sewer lines, what size lines to I need ? I know I have to use a “Y” then run to a drain. Should I use 3 20ft lines ? Just looking to see what everyone is using.
As an owner of a two week old 352, I can confirm that they do not “pop up”. I personally use heavy duty ratchet style tie downs. They fit just fine into the opening points. They provide many points for this small of a garage… 8 if I remember correctly.

And they were gracious enough to “Y” the lines for us on this model! No need for anything special. Just have to release both valves.
MathewB is offline   Reply With Quote
Old 08-20-2021, 11:38 AM   #6
Dan Lockwood
Senior Member
 
Join Date: Sep 2019
Location: O'Fallon
Posts: 209
In my first picture, the bigger rectangular items are B&W Biker Bar mounts for my Harley and Honda Helix. They are NOT standard nor what I was referring to as standard Raptor tie down rings.

The single round tie down ring is what I know to be standard for many years and was in some late model Fuzion's I saw last year at Sturgis.

The single rings are numerus in the garage. I think I have maybe 9 of them in my '12 garage. These are welded to the outside "I" beams and to the center "C" channel that runs down the center of the garage floor.

There's plenty of room to get your hook into and under the center rod for tie down straps. Although with my Biker Bars, I do NOT do any tie downs and just ride the bikes in and they snap/lock into place and I step off and they're loaded up!

Hope this helps.
Attached Thumbnails
Click image for larger version

Name:	Tie Down Ring Garage.JPG
Views:	43
Size:	96.3 KB
ID:	35344   Click image for larger version

Name:	B&W Biker Bar Floor Mount Dual 3.jpg
Views:	51
Size:	238.7 KB
ID:	35345  
__________________
Dan
2012 Keystone Raptor 395LEV
2021 Ford F-350 King Ranch DRW 6.7 Diesel
'09 Harley CVO Road Glide
'76 Harley FLH Shovelhead
Dan Lockwood is offline   Reply With Quote
Reply

Tags
raptor

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by the Keystone RV Company or any of its affiliates in any way. Keystone RV® is a registered trademark of the Keystone RV Company.


All times are GMT -8. The time now is 09:24 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.