Slide adjustment on MKS 326 (couch side)
My slide on the non driven motor side does not close as far as my motor side of the slide. I looked and the adjustment bracket is adjusted as close as it can get to the trailer so there is no more adjustment available. I was wondering if anyone has been on the inner frame side of the trailer that is covered. I am looking to see if there is anymore adjustment. I realize I would have to cut a hole in the belly material to access the adjustment. I was also wondering if the gear can be lowered away from the slide bar and then push the slide in and place the gear back against shaft if that would pull it in.
The way it currently stands the seal on the bottom of the trailer is barely touching against the side of the trailer. I am looking to get about 3/4 of an inch more to tighten it up along the bottom.
I looked at Lipperts web site and I have already made the adjustment they stated but more is still needed. Thanks for all the help... this site is great and saves a lot of time.
__________________
Jay and Lori
2016 Impact 311
2015 Cougar 337 FLS (retired)
2012 Cougar 326MKS (retired)
Mor-Ryde Pin Box
2015 Super Duty F350 6.7 4x4 King Ranch
2008 Super Duty F250 6.4 Diesel 4x4 Lariat (retired)
2005 Goldwing
|