Fuzion Control Panel

[Fuzion342]

Wife and I were getting packed up this morning and ran into Control Panel issues. I used the panel to put both awnings in no problem, a few minutes later the wife went to use the panel to put the main slides in and we have no power to the main hydraulic slides.. we got home home and now the awnings don’t work from the control panel??? Any ideas?? I have checked all fuses and they all look good. Currently from the control panel.
Bedroom slide 12v electric… working
Awnings 12v electric… not working
Main hydraulic slides… not working
Generator start… working
All tank sensors… working
Everything works perfect from the remote.. what are the chances that 3 switches buggered up at the same time, same day??
Thank you

[LHaven]

Originally Posted by Fuzion342

what are the chances that 3 switches buggered up at the same time, same day??

Can happen easily with a mouse problem.

[Fuzion342]

We don’t have any rodents in the trailer… or at least no sign of them, but yes I hear you.. they are horrible and can make a mess of everything.

[LHaven]

The only "sign" I ever had of rodents in the trailer were the three wires the little bugger chewed in half, taking out two lights. That's a pretty good match to your situation.

(Actually there was one other sign, six months later -- an infestation in the bedroom of Palo Verde beetles, climbing out through the ceiling seams as they hatched seasonally from the stash of Palo Verde beans that are still secreted somewhere up there.)

[Fuzion342]

Update… problem solved. In the belly roughly
In the middle of the trailer is the control panel and two 15amp fuses.. one of those were NFG. Replaced fuse and everything now works as it should.