|
07-29-2021, 02:29 PM
|
#1
|
Junior Member
Join Date: Apr 2021
Location: Montrose
Posts: 27
|
2021 Cougar 22RBS winterizing valves
Can't find the winterizing valves. Any hints?
|
|
|
07-29-2021, 03:16 PM
|
#2
|
Site Team
Join Date: Oct 2011
Location: Joppa, MD
Posts: 11,757
|
Quote:
Originally Posted by Cimriver
Can't find the winterizing valves. Any hints?
|
Where have you looked?
__________________
Marshall
2012 Laredo 303 TG
2010 F250 LT Super Cab, long bed, 4X4, 6.4 Turbo Diesel
|
|
|
07-29-2021, 08:59 PM
|
#3
|
Senior Member
Join Date: Dec 2017
Location: Wandering the Country
Posts: 596
|
Quote:
Originally Posted by Cimriver
Can't find the winterizing valves. Any hints?
|
Usually on the back of the water heater. I'm guessing, but don't you have a cabinet just to the left of the doorway as you enter? If so, remove the two wood panels at the very bottom, two screws in each one. I believe your water heater is under there.
|
|
|
07-30-2021, 06:23 AM
|
#4
|
Junior Member
Join Date: Apr 2021
Location: Montrose
Posts: 27
|
Quote:
Originally Posted by mikec557
Usually on the back of the water heater. I'm guessing, but don't you have a cabinet just to the left of the doorway as you enter? If so, remove the two wood panels at the very bottom, two screws in each one. I believe your water heater is under there.
|
I did remove the panel to the left of the door. I could see the water heater, but saw no bypass valves. I'll take a closer look today.
|
|
|
07-30-2021, 06:58 AM
|
#5
|
Senior Member
Join Date: Dec 2017
Location: Wandering the Country
Posts: 596
|
Quote:
Originally Posted by Cimriver
I did remove the panel to the left of the door. I could see the water heater, but saw no bypass valves. I'll take a closer look today.
|
I think there's two wooden panels below the closet. If I'm right, you'd have to remove the one on the right to see the valves and to reach your arm in to turn the valves.
|
|
|
07-30-2021, 07:07 AM
|
#6
|
Junior Member
Join Date: Jul 2020
Location: North Dakota
Posts: 17
|
Its the right panel
|
|
|
07-30-2021, 07:13 AM
|
#7
|
Junior Member
Join Date: Apr 2021
Location: Montrose
Posts: 27
|
Quote:
Originally Posted by mikec557
I think there's two wooden panels below the closet. If I'm right, you'd have to remove the one on the right to see the valves and to reach your arm in to turn the valves.
|
Below the closet, left of the door there is one panel and the power center to the right of that. I removed the panel again and this time I spotted one of the bypass valves. Couldn't see the second valve and no hose to suck the antifreeze into the plumbing. I guess my next move is to pull the power center out a bit to see what else is behind it.
Thanks for your response.
|
|
|
07-30-2021, 07:32 AM
|
#8
|
Site Team
Join Date: Mar 2011
Location: Gaylord
Posts: 26,997
|
There may only be one valve on your water heater, located on the lower "cold water input PEX line". On that type, there is no "manual valve" on the hot water outlet, rather a "one way valve" located behind the brass fitting that connects to the trailer plumbing.
As for a "antifreeze input hose", few (if any) trailers come with that equipment. If you have a flojet water pump, you'll need to buy a "quick connect fitting" (just like the one installed in the "INLET" to your pump head. Then buy a "appropriately sized" length of clear vinyl tubing from Lowe's, HD or any hardware store. Pull the blue tab on your water pump inlet, disconnect the fitting, insert your "new fitting with the tubing on it" and lock the tab in place. Put the end of the hose in a gallon jug of antifreeze and turn the water pump on. It will draw antifreeze into the plumbing system.
On a ShurFlo water pump, you'll need a "screw-on type fitting" to do the same, or you can buy a "winterizing kit" that attaches permanently to the water pump.
Either way, CLOSE THE WATER HEATER VALVE(s) before drawing antifreeze into the plumbing system. RV antifreeze is corrosive to the water heater tank lining. So, do not put RV antifreeze into your water heater.
__________________
John
2015 F250 6.7l 4x4
2014 Cougar X Lite 27RKS
|
|
|
07-30-2021, 07:49 AM
|
#9
|
Junior Member
Join Date: Apr 2021
Location: Montrose
Posts: 27
|
Quote:
Originally Posted by JRTJH
As for a "antifreeze input hose", few (if any) trailers come with that equipment.
|
First thanks for the detailed response. Very helpful!
Your comment that few if any trailers come with the antifreeze input hose is surprising to me. This rv is our seventh. Every rv prior to this came with the input hose and reasonably accessible valves. This rv has neither.
|
|
|
07-30-2021, 07:59 AM
|
#10
|
Senior Member
Join Date: Dec 2017
Location: Wandering the Country
Posts: 596
|
Quote:
Originally Posted by Cimriver
First thanks for the detailed response. Very helpful!
Your comment that few if any trailers come with the antifreeze input hose is surprising to me. This rv is our seventh. Every rv prior to this came with the input hose and reasonably accessible valves. This rv has neither.
|
I'm on my 3rd "big RV" and have never had an input hose, nor easy access. Only thing easy that I can think of are the two low point drains. LOL.
|
|
|
07-30-2021, 08:03 AM
|
#11
|
Senior Member
Join Date: Jan 2013
Location: Indiana
Posts: 2,719
|
Don't you just love it when RV manufacturers hide things from the consumer! They want you to bring it back for a service call. It guarantees more repeat revenue for them!
__________________
2019 Montana High Country 375FL
2014 Chevy Duramax HD 6.6 - 3500 Diesel Dully Long bed Crew Cab
|
|
|
07-30-2021, 08:48 AM
|
#12
|
Site Team
Join Date: Oct 2011
Location: Joppa, MD
Posts: 11,757
|
Have you looked at the FW pump? If it has a winterizing kit it will be "teed" into the suction side of the pump.
__________________
Marshall
2012 Laredo 303 TG
2010 F250 LT Super Cab, long bed, 4X4, 6.4 Turbo Diesel
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|