Slideout mechanism
Hi all,
On my 08 Keystone 294RLS, the slideout seems to elevate slightly (tip up) when fully closing at max closing limit. When opening it at max opening limit, it seems to do the same thing. This is only for the last inch or so of movement either way. To clarify when retracting and looking from the inside the top of the slideout lifts, and when extending and looking from inside the top of the slide lowers slightly.
The alignment is at each end is within 1/4" horizontally.
The pump does seem to work harder the first 10 inches or movement both in and out. No weird noises or jittering.
Is this normal?
There doesn't seem to be a limit switch on the slideout mechanism (Lippert). The manual says the pump stops a few seconds after reaching the extremes.
Thanks,
Paul
|