Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
 

Go Back   Keystone RV Forums > Keystone Tech Forums > Repairs & Maintenance
Click Here to Login

Reply
 
Thread Tools Display Modes
 
Old 09-13-2018, 05:11 AM   #1
vol_travelers
Junior Member
 
Join Date: Sep 2018
Location: Knoxville
Posts: 1
Replacing Shower Faucet - Tight access

Does anyone have experience or suggestions replacing the shower faucet? I took the plastic cover loose and broke the seal against the shower wall, but the cover only comes out less than an inch. I am afraid of taking the old faucet loose and not being able to get the new one attached. Is there a way to gain some slack in the supply lines? Any suggestions are most appreciated.

2016 Keystone Cougar 28RLS
vol_travelers is offline   Reply With Quote
Old 09-13-2018, 05:27 AM   #2
WNY Bullet
Senior Member
 
Join Date: Oct 2017
Location: Rochester, NY
Posts: 590
Mine pulled out slightly, but then "up" enough to gain access to the connections
__________________
Mike & Barb
2015 Keystone Bullet Premier 26RBPR
2018 Cedar Creek 36CK2
2017 Chevy Silverado LT Z71

WNY Bullet is offline   Reply With Quote
Old 09-13-2018, 06:37 AM   #3
JRTJH
Site Team
 
JRTJH's Avatar
 
Join Date: Mar 2011
Location: Gaylord
Posts: 26,839
PEX tubing is flexible (to an extent) and there is some freeplay in the tubing length. That said, if you have 4 or 5 inches of freeplay to work with, you're about where most RV's are in plumbing "flexibility"....

Any replacement faucet will either need to have the same orientation to the hot/cold connections or you'll have to buy and fit adapters to the new faucet. Space and that limited flexibility will limit your choices. Typically, faucets that fit the shower will be limited to the few with similar connections. Adapters are hard to fit into the wall space and make changing to a different style of faucet difficult. (not impossible, but difficult)...
__________________
John



2015 F250 6.7l 4x4
2014 Cougar X Lite 27RKS
JRTJH is online now   Reply With Quote
Old 09-13-2018, 06:38 AM   #4
ken56
Senior Member
 
Join Date: Aug 2017
Location: Dandridge TN
Posts: 260
My black tank rinse vacuum breaker plugged up and its located behind my shower valves and because my dealer did it under warranty I only saw it disconnected. I wondered the same thing about how do you have enough room to work on it. Eventually I want to replace my shower faucets also but so far its in the category of if it ain't broke don't fix it.
ken56 is offline   Reply With Quote
Old 09-13-2018, 06:48 AM   #5
chuckster57
Site Team
 
chuckster57's Avatar
 
Join Date: Jul 2014
Location: Modesto
Posts: 20,235
Us techs find the guy with the smallest hands for those jobs LOL.
__________________

2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.

Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
chuckster57 is offline   Reply With Quote
Old 09-13-2018, 06:55 AM   #6
JRTJH
Site Team
 
JRTJH's Avatar
 
Join Date: Mar 2011
Location: Gaylord
Posts: 26,839
Quote:
Originally Posted by chuckster57 View Post
Us techs find the guy with the smallest hands for those jobs LOL.
Unless you're working alone, then call the DW to get the fittings started and refrain from any "verbal assistance" until she's out of hearing range......
__________________
John



2015 F250 6.7l 4x4
2014 Cougar X Lite 27RKS
JRTJH is online now   Reply With Quote
Old 09-13-2018, 08:28 PM   #7
bobbecky
Senior Member
 
bobbecky's Avatar
 
Join Date: Jul 2013
Location: Box Elder
Posts: 2,897
Our shower plumbing wall has a pocket door behind it, and then there is the pantry cabinet into the kitchen area. Access to the plumbing and or the air gap/back flow device would be through a hole cut into the back of the pantry cabinet, and when completed, either a new piece of plywood to cover the hole, or I've seen where they took the piece cut out and trimmed it with molding so it could be used to cover the hole. This is a photo of the air gap device, looking into the area where the pocket door is.
Attached Thumbnails
Click image for larger version

Name:	back flow valve.jpg
Views:	261
Size:	16.6 KB
ID:	18540  
__________________
Bob & Becky
2012 3402 Montana
2012 Chevy 2500HD D/A CC
bobbecky is offline   Reply With Quote
Old 09-14-2018, 05:50 AM   #8
flybouy
Site Team
 
Join Date: Oct 2011
Location: Joppa, MD
Posts: 11,714
Quote:
Originally Posted by chuckster57 View Post
Us techs find the guy with the smallest hands for those jobs LOL.
Yup, I have bear claws for hands myself, when we bought our wedding rings the jeweler's ring gauge only went to 15 and it wasn't large enough. Anyway when I'm working in a tight space I call the DW out. She's a petite retired nurse,nursing instructor and was a NICU (neonatal ICU) nurse, perfect! She can thread an iv into a the tiny veins of a premature baby so she can do that sort of thing(as long as I reminder her righty tighty lefty loosey)
One recommendation Vol traveler, I would tie some light string or monofilament to anything that I pull out of a confined space like that BEFORE disconnecting it. With my luck if I didn't it would disappear down the wall when released. YMMV
__________________
Marshall
2012 Laredo 303 TG
2010 F250 LT Super Cab, long bed, 4X4, 6.4 Turbo Diesel
flybouy is offline   Reply With Quote
Old 09-14-2018, 06:14 AM   #9
chuckster57
Site Team
 
chuckster57's Avatar
 
Join Date: Jul 2014
Location: Modesto
Posts: 20,235
Cant say I have ever "lost" a pex line that couldn't be retrieved.....YET
__________________

2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.

Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
chuckster57 is offline   Reply With Quote
Old 09-14-2018, 06:29 AM   #10
hankaye
Senior Member
 
Join Date: Apr 2011
Location: Arrey,
Posts: 2,368
vol_travelers, Howdy;

I reckon I'm lucky, the access to mine is behind the TV in the entertainment
center. But only a rectangle of about 5" X 4". Agree wholeheartedly with
flybouy, finding something to secure the lines and their fittings is the wise
way to proceed. Also, don't button it all back up until after you've leak checked
the fittings.

hank
__________________
Striving for a less complicated life since 1949 ...

Home: 2008 Cougar 278 RKS
T.V.: 2004 F-250 4X4, Level III BulletProofed , Detroit Tru-Track Differential (915A550)
Dog: 2006 Border Collie (Rascal) aka Maximum fur dispersal unit. (08/04/2006 - 12/16/2017) RIP.
hankaye is offline   Reply With Quote
Old 09-14-2018, 07:00 AM   #11
flybouy
Site Team
 
Join Date: Oct 2011
Location: Joppa, MD
Posts: 11,714
Quote:
Originally Posted by chuckster57 View Post
Cant say I have ever "lost" a pex line that couldn't be retrieved.....YET
Your luck is better than mine! And retrieving a PEX line from inside a wall with mechanical claw didn't work for me as the PEX was too slick, don't ask me how I know.

Quote:
Originally Posted by hankaye View Post
vol_travelers, Howdy;

I reckon I'm lucky, the access to mine is behind the TV in the entertainment
center. But only a rectangle of about 5" X 4". Agree wholeheartedly with
flybouy, finding something to secure the lines and their fittings is the wise
way to proceed. Also, don't button it all back up until after you've leak checked
the fittings.

hank
Excellent advice.
__________________
Marshall
2012 Laredo 303 TG
2010 F250 LT Super Cab, long bed, 4X4, 6.4 Turbo Diesel
flybouy is offline   Reply With Quote
Old 09-14-2018, 09:30 AM   #12
Gegrad
Senior Member
 
Gegrad's Avatar
 
Join Date: Jul 2017
Location: Monroeville
Posts: 1,548
When I did mine last year I didn't have very much room to work. I mostly just wedged my hand in there and got the old one loose and the new one connected. Scraped the hand up a bit but got it done. It is a tight squeeze but it can be done.
__________________
2014 Bullet Premier 29bh in Charocal
2019 Ram 2500 HD 4x4, CC, 6.4L
2011 Passport 2510RB (Sold)
Gegrad is offline   Reply With Quote
Old 09-20-2018, 08:04 AM   #13
Jweems
Junior Member
 
Join Date: Sep 2017
Location: Old Hickory
Posts: 13
Quote:
Originally Posted by vol_travelers View Post
Does anyone have experience or suggestions replacing the shower faucet? I took the plastic cover loose and broke the seal against the shower wall, but the cover only comes out less than an inch. I am afraid of taking the old faucet loose and not being able to get the new one attached. Is there a way to gain some slack in the supply lines? Any suggestions are most appreciated.

2016 Keystone Cougar 28RLS
I needed to replace the entire shower faucet assembly and found it on line, it was the exact replacement part and color. I was able to remove the old and install the new and even though it was tight, everything fit easily and there was enough "give" in the lines that it was a fairly easy replacement. I resealed it with caulking and all works great.

We have a 2012 3402 RL Montana Big Sky.
Jweems is offline   Reply With Quote
Old 09-23-2018, 02:37 PM   #14
garroum
Junior Member
 
Join Date: Feb 2018
Location: Goldsboro
Posts: 19
I replaced mine a few months back...I added brass fittings on the end of the PEX to get rid of the plastic ones....added two short braided water supply lines and a new shower faucet...now i have plenty of slack if I ever need to replace again....
__________________
2018 Keystone Cougar Half Ton 27SAB
2017 Ford F250 Superduty 4x4 Diesel
garroum is offline   Reply With Quote
Old 10-04-2018, 09:13 AM   #15
cookinwitdiesel
Senior Member
 
cookinwitdiesel's Avatar
 
Join Date: Sep 2018
Location: Fairfax
Posts: 507
I updated the shower faucet in my Hideout recently. It was extremely tight but I was able to get it done (eventually). Hand got a little scraped up, but I survived Upgraded the hose and shower head while I was at it.

Remember to caulk it back up when done. I used clear caulk and it looks real nice, compared to the yellowish snot stuff they used at the factory.
Attached Thumbnails
Click image for larger version

Name:	IMG_20180928_172012.jpg
Views:	297
Size:	126.4 KB
ID:	18790   Click image for larger version

Name:	IMG_20180928_172005.jpg
Views:	363
Size:	148.1 KB
ID:	18791  
__________________
2019 GMC Sierra 3500HD Denali Diesel DRW (Crew Cab | 8 Ft bed | OEM Puck System | Curt Gooseneck Ball for OEM Puck)
(OLD) 2018 GMC Sierra 2500HD Denali Diesel (Crew Cab | 6.6 Ft bed)
2019 Grand Design Solitude S-Class 3740BH-R Fifth Wheel (Onan 5500W LP Generator | MORryde SRE4000 Suspension | 3x Cross Members | Sailun S637 ST | Reese GooseBox 20k 2nd Gen)
(OLD) 2018 Keystone Hideout 28RKS Travel Trailer
cookinwitdiesel is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by the Keystone RV Company or any of its affiliates in any way. Keystone RV® is a registered trademark of the Keystone RV Company.


All times are GMT -8. The time now is 09:11 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.