Installing Dexter E-Z Flex without removing tires?

[On The Road Again]

I am about to install the Dexter E-Z Flex upgrade on my 2015 Fuzion 331. It has the six point level up system so I can use it to lift one side off of the ground. For a number of reasons, I prefer not to have to remove the tires to install the upgrade. Has anyone done this without doing so? Thanks.

[jtyphoid]

I don't know if your Fuzion has narrow or wide axle spacing, but based on my experience with my narrow spaced, triple axle Raptor, I cannot imagine a strong enough reason to try it without removing the wheels.

[grampscamper]

It will be much more difficult with the wheels on. Removing the wheels will make it much easier to line up the bolts.

[RdRmr]

I did it without taking the wheels off, but I didn't have three axles. Not sure how that would work. Just raised the side up enough to relax the springs (no tension). Tires were still in contact with the ground. Disconnected and installed one at a time. Also installed the wet bolts as well. Really like the E-Z flex system. Happy Campin....