I was under ours this past weekend installing our Strong Arm stabilizers. Along the length of one side of the trailer the Coroplast was secured with self-tapping hex head screws and the other side was secured with the ram-set nails. I am not sure if it was intended that way or if it was built on a Monday. Either way, the ram-set nails have a 1/4” hex head so I gave it a spin with my cordless drill and then popped them out with a mini flat bar. I simply used self-tapping screws and washers in the same holes when I put it back together. To me, this was preferred over cutting and patching the Coroplast bottom since I doubt any patch material would hold for an extended period of time.
__________________
Rob & Amy
2019 Passport 240BH SL (current)
2024 Cougar 29BHL (on order, due early May)
2022 Ford F250 7.3L Godzilla Crew Cab FX4
|