Slideout problem
The other day, as part of the maintenance we perform on our trailer, we applied "Premium RV Slide Out Rubber Seal Conditioner by Thetford". This was a different brand than we have used in the past but the same type of product. After applying this to the seal of our slide, when we brought the slide back in it jerked (a lot) as if sticking. We pulled it back out and again it jerked as it was going out. It left a residue on the metal sides of the slide and on the windows. We figured it must be the new can of seal conditioner so cleaned the rubber off the best we could and applied the old brand we had used in the past (Protect-All). It is better but is still jerking a little. Has anyone else had this experience? We don't want this to damage our slide - which was working smooth and fine before.
__________________
2017 Jayco Melbourne 24k-Jeep Wrangler
2013 Bullet Premier 19FBPR-Dodge Durango V8 Hemi
2013 Rpod 177HRE-Jeep Liberty
2011 Aliner Sport-Jeep Cherokee
2008 Little Guy 5^Wide-Toyota Avalon
1980 Shasta 21-GMC Suburban
1981 Coleman Tent Camper-1981 Dodge Ramcharger
1978 VW Westfalia
Lots of tents
|