|
01-05-2020, 12:58 PM
|
#1
|
Junior Member
Join Date: Jan 2020
Location: Bridgewater
Posts: 7
|
Rubber Roof Coating
My wife and I recently purchased a 2004 Zeppelin 281 in above average condition. Although there are no water leaks, the original EDPM roof is showing significant aging and I am considering applying Dicor's Rubber Roofing Coating System myself to revitalize it. From the research I've done, this product appears to do a great job of restoring the original EDPM membrane. I called Keystone the other day to confirm that I could walk on the roof, and to my surprise they said NO! The 2004 Zeppelin 281 has a non-walkable roof. So I'm wondering now how to get this job done, even if I have to hire someone to do it. I live in Massachusetts and at a loss on where to begin looking. I've placed a few calls to local RV centers and most do not do this. They will however replace the old membrane with a new one for an average cost of approx $8000. Any ideas / advice would be appreciated.
|
|
|
01-05-2020, 01:18 PM
|
#2
|
Site Team
Join Date: Mar 2011
Location: Gaylord
Posts: 26,995
|
First, I think the temperature in Massachusetts, this time of year, would preclude doing anything with a DICOR product until late spring (at the earliest). That said, depending on your weight, you can likely use a couple of 2'x2' blocks of "rigid Styrofoam" cut from a sheet of 2" thick "pink stuff" from Lowe's or Home Depot.
I indicated, "depending on your weight" because if you're under about 220 pounds, the above would spread your weight across multiple rafters and distribute it evenly on the thin OSB surface decking... On the other hand, if you're "a big boy" weighing more than 250 or so, then working from scaffolding erected along the sides of the trailer is much safer than trying to get on the roof.
The Zeppelin line was "named such" because it was one of the "first entries into the ultra-light concept". From it sprang multiple lines of RV's with restrictions on getting on top of the RV. Today, I'd guess that around half the RV's built have "non-walkable roof structures" and things are getting lighter with every model year introductions....
ADDED: Keep in mind that the OSB used in the roof decking on your trailer is "likely 1/4" or possibly 3/8". You can verify what's up there by removing the garnish ring from the bathroom vent fan. Remove the 4 corner screws, the plastic trim will drop down. You'll find the ceiling membrane stapled to the vent framework. Pull the membrane away from the frame and you can visualize the roof decking. Remember that it's probably OSB that's 16+ years old, has lost some of its original strength because of years of aging, twisting as the trailer was towed and from years of exposure to humidity, possible water leaks and potential water damage and/or dry rot. So, there's a very good chance that even if your trailer was constructed with thicker OSB decking, it may not have the same strength as a newer trailer with thinner OSB decking.
__________________
John
2015 F250 6.7l 4x4
2014 Cougar X Lite 27RKS
|
|
|
01-05-2020, 02:39 PM
|
#3
|
Junior Member
Join Date: Jan 2020
Location: Bridgewater
Posts: 7
|
Thanks so much John for the information and insight. As for the timing of the Dicor treatment, you are right.....I was planning to wait until early summer, when it's at least 70 degrees or higher. As for my weight, I'm around 180lbs, so your suggestion to use rigid styrofoam to distribute my weight is a great option to try. I will also use your suggestion to determine the roof decking material, as I am now curious as to the actual material and thickness.
Thanks again
Ed
|
|
|
01-05-2020, 02:51 PM
|
#4
|
Senior Member
Join Date: May 2018
Location: Folsom
Posts: 369
|
Check this product out. I met the owner and he said that this is a proprietary formulation that he developed. About the same price as the Dicor system (primer and coating). Free shipping.
https://thervroofman.com/shop?olsPage=products
__________________
2002 Montana 3250RL upgraded a bunch
2005 Ford F-250 6.0 Bullet Proofed - SOLD
2017 Ford F350 6.7 Lariet
|
|
|
01-05-2020, 03:46 PM
|
#5
|
Senior Member
Join Date: Apr 2015
Location: nm
Posts: 1,833
|
Quote:
Originally Posted by Hblick48
Check this product out. I met the owner and he said that this is a proprietary formulation that he developed. About the same price as the Dicor system (primer and coating). Free shipping.
https://thervroofman.com/shop?olsPage=products
|
Personally I would never use urethane , thermal plastic acrylic paint on a rubber roof. I like to see EPDM rubber roof coating clearly marked on the product. There are other material approved for rubber roofs other then Dicor? I have used the Dicor 2 part system along the edges of my toyhualer the EPDM coating is extremely tough.
__________________
2018 1 ton 4x4 c.c standard bed GMC Denali
Anderson ultimate hitch
2015 311 Impact Fusion toy hauler
2018 Milwaukee 8 FLRTU roadglide glide ultra
2018 800 Z force spot BUGGY.
500 watts of solar enough power for boon docking.
|
|
|
12-24-2020, 07:16 AM
|
#7
|
Senior Member
Join Date: Apr 2015
Location: nm
Posts: 1,833
|
Quote:
Originally Posted by Badbart56
|
Using 100% silicone if you ever have to repair the roof good luck finding a tape or decor product that will stick .
__________________
2018 1 ton 4x4 c.c standard bed GMC Denali
Anderson ultimate hitch
2015 311 Impact Fusion toy hauler
2018 Milwaukee 8 FLRTU roadglide glide ultra
2018 800 Z force spot BUGGY.
500 watts of solar enough power for boon docking.
|
|
|
12-24-2020, 07:23 AM
|
#8
|
Senior Member
Join Date: Jun 2018
Location: USA and Canada
Posts: 873
|
Quote:
Originally Posted by roadglide
Using 100% silicone if you ever have to repair the roof good luck finding a tape or decor product that will stick .
|
It's not a problem. If you do a little research you would learn that repairs are easily made using the available primers that are made for silicone. Dicor even makes this now.
https://cht-silicones.com/products/primers
__________________
2010 FZ 405
2011 F350 6.7 Dually w/Banks Power making 510 hp and 1065 ft/lbs torque
|
|
|
12-24-2020, 08:48 AM
|
#9
|
Junior Member
Join Date: Jan 2020
Location: Bridgewater
Posts: 7
|
Quote:
Originally Posted by David0409
I have a travel trailer that requires recoating 1 to 2 years, I have used Heng's rubber roof coating for the 2015, it does its job, I put on as on instructed, I use when ever my 29 ft travel trailer needs it be cause it works as promised, also they are always prompt in delivery to me. See no need to change, because If it works why risk changing it. I think its a high quality. I always double coat so I don't miss a spot.
|
Thanks for the info. What I've learned is this product should NOT be used on EDPM RV roofs because it is acrylic based, meaning it is NOT water resistant long term, and will flake off, period. It will make you feel great about your roof at first, but then it will be ruined after it's been on long enough to flake. This is a temporary fix to stave off a roof replacement for a year or two, at best!
If you buy this: know that it WILL flake off eventually even if you apply it only a perfectly prepped surface. That's just how acrylics work. This isn't a negative judgement against the seller or the manufacturer... it's just a poor product all around in terms of long-term RV roof care.
|
|
|
12-25-2020, 06:51 AM
|
#10
|
Senior Member
Join Date: Jan 2020
Location: Metamora
Posts: 143
|
I have a non walkable roof and weigh about the same as the op. I have used long 2x4s to spread my weight when changing the a/c gasket and it worked great. Rigid styrofoam is probably even better.
|
|
|
12-25-2020, 08:15 AM
|
#11
|
Senior Member
Join Date: Nov 2017
Location: Picacho, Az
Posts: 6,809
|
Quote:
Originally Posted by David0409
I have a travel trailer that requires recoating 1 to 2 years, I have used Heng's rubber roof coating for the 2015, it does its job, I put on as on instructed, I use when ever my 29 ft travel trailer needs it be cause it works as promised, also they are always prompt in delivery to me. See no need to change, because If it works why risk changing it. I think its a high quality. I always double coat so I don't miss a spot.
|
Just curious?
How/why did you determine it needed coating the 1st time? And why the need every couple years?
I've had several RVs with both types of roof & only than regular cleaning, inspection & occasional recaulking, which is all that's recommended by the manufacturer of both types, I've never seen a need to coat it with anything other than soap & water.
__________________
Full-timed 10+ years
Sold '13 Redwood FB
Traded '13 GMC Denali DRW D/A
Replacement undetermined
|
|
|
12-25-2020, 05:45 PM
|
#12
|
Senior Member
Join Date: Jul 2013
Location: Liberty, Texas
Posts: 5,034
|
I was wondering the same. The only roof I have totally recoated was an aluminum roof on a 1980 vintage cabover truck camper. I think I used a white "Cool Seal" product.
But, I do use Hengs rubber roof coating on my Bigfoot cabover. However, just around the roof penetrations...vent, skylight, fridge vent, etc. That is what Bigfoot used at the factory so rather than risk using something incompatible I continue with the Hengs.
__________________
2018 Ram 3500 Laramie CC DRW LWB 4X4 Cummins Aisin 3.73
Reese Goosebox 20K
2018 Heartland Landmark 365 Oshkosh
2008 Bigfoot 25C9.4 LB Cabover
2023 CanAm Defender SXS
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|