Raptor 377SE Bed Slide out won't go in.

[dmccrar]

I have a Raptor 377SE. On this Trailer there are 3 slide outs they are operated with a Hydraulic system with one Switch....Order of operation is first the Bed, then the Kitchen and last Table area will extend and they also retract in that same order.... . When I push the switch to bring in the slides the Kitchen and Table area retract just fine, but nothing happens with the bedroom slide, No noises or movement. I have check my oil level and it is in the normal fluid level.
check fuses, they are fine.... Any Ideas on what I might try to fix the Bedroom slide so it will retract, would be appreciated.... Thank you

[FrankO]

Any updates on this? This just happened to me today.

[chuckster57]

First thing is to lift the bed and take a look at the hydraulic cylinder. If it’s retracting, then look at the mounts. If the cylinder isn’t doing anything, then we need to look at the manifold and solenoids.

[dmccrar]

As I examined the bed closer I have identified that the floor where the ram attaches to support bracket on the floor rotted out and the screws pulled loose. So I needed to replace that section of floor and reattach the support to pull the bedroom and in.