|
|
06-20-2022, 03:55 AM
|
#1
|
Senior Member
Join Date: Jun 2022
Location: Floresville
Posts: 106
|
The Frame or the Axle?
Just getting prepared for our first Shake-Down run in September. Not going too far just in case. New tires upon our return. Question... "In Case" of a blowout, is it best to jack up the Frame or the Axle to change out the tire? Owners manual states the Frame but, there are many videos our there showing jack on the Axle. Not sure what is the Right Way or the Best Way. Would like to hear some opinions.
__________________
2019 Laredo 325RL
2017 Ford F350 DRW
USAF Retired, (20 years, Firefighter)
|
|
|
06-20-2022, 04:27 AM
|
#2
|
Site Team
Join Date: Jul 2014
Location: Modesto
Posts: 20,357
|
If you have self leveling I would use it. Manual mode and lift affected side. Otherwise you can use a good jack under the axle at the spring mount. Lifting the frame may require a TALL jack or lots of blocks.
__________________
2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.
Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
|
|
|
06-20-2022, 04:39 AM
|
#3
|
Site Team
Join Date: Oct 2011
Location: Joppa, MD
Posts: 11,760
|
I carry a Trailer Aid Plus for that. It's a plastic ramp with a saddle for the tire to set in. Drive the inflated tire up on the ramp and the flat will come off the ground. That and my Dewalt cordless impact gun are the fastest most painless way I know of to change a flat. You can accomplish the same thing with wood blocks built the Trailer Aid is an easy throw it down, drive up on it device that makes life easy IMO.
__________________
Marshall
2012 Laredo 303 TG
2010 F250 LT Super Cab, long bed, 4X4, 6.4 Turbo Diesel
|
|
|
06-20-2022, 05:30 AM
|
#4
|
Site Team
Join Date: Feb 2014
Location: W. Texas
Posts: 17,695
|
Some good advice above but I've found that I prefer roadside assistance if I'm on the shoulder of an Interstate with non stop 80mph traffic passing 2-3' away....I'll let THOSE guys play in the traffic.
__________________
Danny and Susan, wife of 56 years
2019 Ram 3500 Laramie CC SWB SB 6.4 4x4 4.10
2020 Montana High Country 331RL
|
|
|
06-20-2022, 07:28 AM
|
#5
|
Senior Member
Join Date: Jan 2013
Location: Indiana
Posts: 2,720
|
Quote:
Originally Posted by flybouy
I carry a Trailer Aid Plus for that. It's a plastic ramp with a saddle for the tire to set in. Drive the inflated tire up on the ramp and the flat will come off the ground. That and my Dewalt cordless impact gun are the fastest most painless way I know of to change a flat. You can accomplish the same thing with wood blocks built the Trailer Aid is an easy throw it down, drive up on it device that makes life easy IMO.
|
I made my own:
And I carry it with me like this:
__________________
2019 Montana High Country 375FL
2014 Chevy Duramax HD 6.6 - 3500 Diesel Dully Long bed Crew Cab
|
|
|
06-20-2022, 10:51 AM
|
#6
|
Senior Member
Join Date: Apr 2022
Location: Middletown PA
Posts: 149
|
Quote:
Originally Posted by dutchmensport
I made my own:
And I carry it with me like this:
|
Solid design and planning at work right here
|
|
|
06-24-2022, 03:23 AM
|
#7
|
Senior Member
Join Date: Mar 2014
Location: Mountain Home, Idaho
Posts: 3,015
|
I use my six point hydraulic level up to loft tires off the ground for both annual brake and wheel bearing maintenance as well as if I needed to put the spare tire on.
I don’t use roadside assistance.. not gonna sit somewhere for who knows how long t9 change a flat when I can do it myself in less than 15 minutes.
There may come a day when I have to get some sort of roadside assistance but at age 68 I am more than capable of doing anything mechanical on my fifth wheel
__________________
2007 GMC Classic club cab 4x4 Duramax LBZ
2014 Alpine 3010 RE. 34 foot fifth wheel
|
|
|
06-24-2022, 03:51 AM
|
#8
|
Senior Member
Join Date: Aug 2020
Location: Upper Chesapeake Bay
Posts: 4,840
|
my neighbor just got a new ram 1500 pickup….his front tire blew out on his maybe 6 or 7 year old ram while on a long sweeping ramp into Baltimore City….he said he didn’t want to stop right there to try and change it so he drove to a safe spot….the tire came apart and ripped out his computer and wiring harness and the truck died…insurance totaled it out i guess because of the chip shortage.
i don’t think i’m gonna attempt to change a flat on the traffic side of my fifth wheel…too many people looking at their phones or distracted these days…probably a good idea to keep the spare loose in the back of the truck so you can swap it out easily and not dawdle around on the side of the road like you have all day…make it like a nascar pit crew
__________________
2020 Cougar 315 RLS
2020 Ram 3500 6.7HO 4.10 Dually Aisin
|
|
|
06-24-2022, 04:01 AM
|
#9
|
Site Team
Join Date: Oct 2011
Location: Joppa, MD
Posts: 11,760
|
Quote:
Originally Posted by jasin1
my neighbor just got a new ram 1500 pickup….his front tire blew out on his maybe 6 or 7 year old ram while on a long sweeping ramp into Baltimore City….he said he didn’t want to stop right there to try and change it so he drove to a safe spot….the tire came apart and ripped out his computer and wiring harness and the truck died…insurance totaled it out i guess because of the chip shortage.
i don’t think i’m gonna attempt to change a flat on the traffic side of my fifth wheel…too many people looking at their phones or distracted these days…probably a good idea to keep the spare loose in the back of the truck so you can swap it out easily and not dawdle around on the side of the road like you have all day…make it like a nascar pit crew
|
So he drove 15 miles away from the city? I think it's all situational. You have to make a judgement call on the risk of changing a tire where you're at vs the risk of limping along until you arrive at a "safe" place. I don't see it as a one size fits all situation or a call that can be second guessed by Monday morning QBs. JMO
__________________
Marshall
2012 Laredo 303 TG
2010 F250 LT Super Cab, long bed, 4X4, 6.4 Turbo Diesel
|
|
|
06-24-2022, 04:09 AM
|
#10
|
Senior Member
Join Date: Mar 2021
Location: Fort White, Fl.
Posts: 688
|
Quote:
Originally Posted by flybouy
I carry a Trailer Aid Plus for that. It's a plastic ramp with a saddle for the tire to set in. Drive the inflated tire up on the ramp and the flat will come off the ground. That and my Dewalt cordless impact gun are the fastest most painless way I know of to change a flat. You can accomplish the same thing with wood blocks built the Trailer Aid is an easy throw it down, drive up on it device that makes life easy IMO.
|
This is what I have also. Had to add a 2x8 to the bottom of it to get enough clearance.
__________________
Rick
2021 Alpine 3790FK
2021 Ford SD F350 6.7 PS 4x4 Crew Cab LB Dually
|
|
|
06-24-2022, 04:16 AM
|
#11
|
Site Team
Join Date: Oct 2011
Location: Joppa, MD
Posts: 11,760
|
Quote:
Originally Posted by RickV
This is what I have also. Had to add a 2x8 to the bottom of it to get enough clearance.
|
Mine is the "plus" which means it has a thick layer of rubber in the saddle. It raises the the other tire with about 2" of clearence but the axles on mine are. Very close. I could see how it could require added height for other axle configurations.
__________________
Marshall
2012 Laredo 303 TG
2010 F250 LT Super Cab, long bed, 4X4, 6.4 Turbo Diesel
|
|
|
06-24-2022, 04:20 AM
|
#12
|
Senior Member
Join Date: Aug 2020
Location: Upper Chesapeake Bay
Posts: 4,840
|
Quote:
Originally Posted by flybouy
So he drove 15 miles away from the city? I think it's all situational. You have to make a judgement call on the risk of changing a tire where you're at vs the risk of limping along until you arrive at a "safe" place. I don't see it as a one size fits all situation or a call that can be second guessed by Monday morning QBs. JMO
|
Yeah he was on the ramp for 395 heading into Baltimore …he ended up broke down INSIDE Baltimore …I had a dually box truck some years ago and a guy that worked for me always cut right thru Baltimore as a shortcut to get home ..I told him not to do that but he was hardheaded. He once got two flats on one side of the dually as he had driven with the inside tire low for a while….I had to go down there at night and wait for a giant rollback to pick the truck up as it was full of tools and equipment …having employees can be …..let’s say …challenging…. at times
__________________
2020 Cougar 315 RLS
2020 Ram 3500 6.7HO 4.10 Dually Aisin
|
|
|
06-24-2022, 04:41 AM
|
#13
|
Site Team
Join Date: Oct 2011
Location: Joppa, MD
Posts: 11,760
|
Quote:
Originally Posted by jasin1
Yeah he was on the ramp for 395 heading into Baltimore …he ended up broke down INSIDE Baltimore …I had a dually box truck some years ago and a guy that worked for me always cut right thru Baltimore as a shortcut to get home ..I told him not to do that but he was hardheaded. He once got two flats on one side of the dually as he had driven with the inside tire low for a while….I had to go down there at night and wait for a giant rollback to pick the truck up as it was full of tools and equipment …having employees can be …..let’s say …challenging…. at times
|
When you said long ramp that 395 ramp from 95 to the stadiums immediately came to mind. Balmer has always been a rough town but it's truly a shame how the state of things have deteriorated to these days.
__________________
Marshall
2012 Laredo 303 TG
2010 F250 LT Super Cab, long bed, 4X4, 6.4 Turbo Diesel
|
|
|
06-24-2022, 04:44 AM
|
#14
|
Senior Member
Join Date: Mar 2021
Location: Fort White, Fl.
Posts: 688
|
Quote:
Originally Posted by flybouy
Mine is the "plus" which means it has a thick layer of rubber in the saddle. It raises the the other tire with about 2" of clearence but the axles on mine are. Very close. I could see how it could require added height for other axle configurations.
|
Mine is the plus also. On my old 5ver with the same size tires and 16" wheels, I forget which axle front or rear would not allow the other tire to come off the ground. So I did the modification.
|
|
|
06-24-2022, 05:36 AM
|
#15
|
Site Team
Join Date: Oct 2011
Location: Joppa, MD
Posts: 11,760
|
Quote:
Originally Posted by RickV
Mine is the plus also. On my old 5ver with the same size tires and 16" wheels, I forget which axle front or rear would not allow the other tire to come off the ground. So I did the modification.
|
If it works that's all that counts. I've been fortunate and over the many years have had 2 flats. Both were my fualt as I rubbed a curb exiting a tight area. After the first time it happened I bought the trailer aid. Second occurrence was so much easier and faster.
I'm not a fan of lying under a vehichle on the side of the road with my feet hanging out in traffic. Also not a fan of lying in dirt, mud, oil, grease whatever to use a jack under the axle. Also don't like the idea of laying in front of the front axle considering what might happen if someone runs into the back of the trailer.
I do like the idea of grabbing one item that I can drop in front of or behind a tire and drive up on it. The saddle eliminates the need for chocking the tire. I keep my Dewalt 1/2" drive 20v impact gun in the bed of the truck with the socket for the lugnut on it. I can change a tire quickly with minimal body exposure even with my physical defecits.
I do have roadside assistance but I'm a "mitigate the risk" sort of person. IMO taking reasonable precautions and taking 5 min to replace a tire is less risky than setting there potentially for hours waiting on the calvary to arrive. I'll call for roadside assistance if God forbid an axle spindle melts down or a spring breaks, etc.
This is what works for me, YMMV
__________________
Marshall
2012 Laredo 303 TG
2010 F250 LT Super Cab, long bed, 4X4, 6.4 Turbo Diesel
|
|
|
06-24-2022, 05:38 AM
|
#16
|
Senior Member
Join Date: Jun 2022
Location: Floresville
Posts: 106
|
Quote:
Originally Posted by flybouy
I carry a Trailer Aid Plus for that. It's a plastic ramp with a saddle for the tire to set in. Drive the inflated tire up on the ramp and the flat will come off the ground. That and my Dewalt cordless impact gun are the fastest most painless way I know of to change a flat. You can accomplish the same thing with wood blocks built the Trailer Aid is an easy throw it down, drive up on it device that makes life easy IMO.
|
I just got one. Should do the job just fine.
__________________
2019 Laredo 325RL
2017 Ford F350 DRW
USAF Retired, (20 years, Firefighter)
|
|
|
06-24-2022, 05:57 AM
|
#17
|
Senior Member
Join Date: Jan 2013
Location: Indiana
Posts: 2,720
|
"You can accomplish the same thing with wood blocks built the Trailer Aid is an easy throw it down, drive up on it device that makes life easy IMO."
Ahhh.... the difference between the Trailer Aid and my home-made, monsterously heavy block is the fact, mine cost nothing! I'm a tight a$$ when it comes to anything I can make or do myself opposed to spending money!
I scalped the wood from an old collapsed barn years and years ago. Actually, I collected several pieces, mostly the 4x4 or the 6x6 posts. The wood is over 150 years old, actually petrified now its so old. The only thing it cost me was a little time and a little bit of brain power using my imagination. I had to use a chain saw to cut it.
__________________
2019 Montana High Country 375FL
2014 Chevy Duramax HD 6.6 - 3500 Diesel Dully Long bed Crew Cab
|
|
|
06-24-2022, 07:29 AM
|
#18
|
Senior Member
Join Date: Mar 2021
Location: Fort White, Fl.
Posts: 688
|
Quote:
Originally Posted by HouseMouse
I just got one. Should do the job just fine.
|
Try it out before you need it. That's how I found out mine needed the additional wood underneath.
__________________
Rick
2021 Alpine 3790FK
2021 Ford SD F350 6.7 PS 4x4 Crew Cab LB Dually
|
|
|
06-24-2022, 07:46 AM
|
#19
|
Site Team
Join Date: Oct 2011
Location: Joppa, MD
Posts: 11,760
|
Quote:
Originally Posted by RickV
Try it out before you need it. That's how I found out mine needed the additional wood underneath.
|
That's always good advice. I recall sometime back Keystone would sell trailers with alloy wheels and a steel spare. When folks went to mount the spare (to change a flat) just to discover that the acorn style nuts wouldn't work on the steel wheel. Always pays to check out these things to eliminate the surprises BEFORE it becomes a necessity.
__________________
Marshall
2012 Laredo 303 TG
2010 F250 LT Super Cab, long bed, 4X4, 6.4 Turbo Diesel
|
|
|
06-24-2022, 07:49 AM
|
#20
|
Senior Member
Join Date: Jun 2022
Location: Floresville
Posts: 106
|
Quote:
Originally Posted by RickV
Try it out before you need it. That's how I found out mine needed the additional wood underneath.
|
Thanks for the Heads Up! I will check it out shortly. Getting ready to turn the 5er 180 and at that point, I will do so.
__________________
2019 Laredo 325RL
2017 Ford F350 DRW
USAF Retired, (20 years, Firefighter)
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|