You only need to remove the TOP facia, the top layer will be brad nailed. If you have a center piece the front and rear facias will have a gap. You might want to label and mark them so they go back on in the correct position. The particle board piece is screwed in place and may take 2 people depending on the length. phillips if I remember right. We use 18ga brads to reattach the top layer.
__________________
2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.
Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
|