Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
 

Go Back   Keystone RV Forums > Keystone Tech Forums > Repairs & Maintenance
Click Here to Login

Reply
 
Thread Tools Display Modes
 
Old 07-26-2020, 07:23 PM   #1
MMSCosta
Junior Member
 
Join Date: Jul 2020
Location: Colorado Springs
Posts: 5
How to replace inline fuse on tongue jack?

Our Ultra 3002 electric tongue jack quit suddenly and we think the inline glass fuse is blown. Does anyone have a link to instructions or a video on how to access and replace the fuse? We can feel it, but are not sure how to get to it. I'm hoping to get some guidance before we muscle it too much (and probably do damage).
MMSCosta is offline   Reply With Quote
Old 07-26-2020, 07:30 PM   #2
Bill-2020
Senior Member
 
Join Date: Oct 2019
Location: Central FL
Posts: 1,083
I don’t know much about that make or model of jack, we have a different type. But According to this exploded sheet, that fuse should be inline before the circuit breaker. Where are you “feeling” it?

https://images.carid.com/ultra-fab/i...structions.pdf
__________________
2023 Cougar HT 23MLE
2020 F250 XLT CC 6.2 4WD
Bill-2020 is offline   Reply With Quote
Old 07-26-2020, 07:45 PM   #3
MMSCosta
Junior Member
 
Join Date: Jul 2020
Location: Colorado Springs
Posts: 5
We can feel the fuse in the cable running from the jack motor to the battery connection, about a foot from the motor. There is a tight rubber "sleeve" over the fuse (I think) and there doesn't seem to be a clear way to pull the sleeve back to access the fuse. This is one of those things that once we see HOW to do it, the doing won't be so difficult!
MMSCosta is offline   Reply With Quote
Old 07-26-2020, 07:51 PM   #4
flybouy
Site Team
 
Join Date: Oct 2011
Location: Joppa, MD
Posts: 11,714
Most in line glass fuse holders either unscrew ( counter clock wise) or are held together with tabs that you have to push the two ends of the fuse holder together and twist it counter clockwise about a 1/4 turn.
__________________
Marshall
2012 Laredo 303 TG
2010 F250 LT Super Cab, long bed, 4X4, 6.4 Turbo Diesel
flybouy is offline   Reply With Quote
Old 07-27-2020, 03:57 AM   #5
Bill-2020
Senior Member
 
Join Date: Oct 2019
Location: Central FL
Posts: 1,083
Obviously the schematics are not what the factory wired up since the fuse is in that position. Can you roll that “sleeve” back on itself and down far enough to separate the fuse holder like Flybouy mentioned?
__________________
2023 Cougar HT 23MLE
2020 F250 XLT CC 6.2 4WD
Bill-2020 is offline   Reply With Quote
Old 07-27-2020, 05:30 AM   #6
flybouy
Site Team
 
Join Date: Oct 2011
Location: Joppa, MD
Posts: 11,714
Are you sure that "sleeve" isn't a piece of heat shrink tubing? If it is, you'll have to cut it off to get to the fuse. If it were mine, I'd get a water resistant blade fuse holder and replace the glass fuse holder.
__________________
Marshall
2012 Laredo 303 TG
2010 F250 LT Super Cab, long bed, 4X4, 6.4 Turbo Diesel
flybouy is offline   Reply With Quote
Old 07-28-2020, 12:47 PM   #7
Todd Burton
Junior Member
 
Todd Burton's Avatar
 
Join Date: Jul 2020
Location: North Dakota
Posts: 17
Had that happen to our last camper, cleaned the connection at the battery post and started working.
Todd Burton is offline   Reply With Quote
Old 07-28-2020, 03:17 PM   #8
MMSCosta
Junior Member
 
Join Date: Jul 2020
Location: Colorado Springs
Posts: 5
Thanks everyone. Turns out it's a regular 30 amp fuse that is on the wire between the motor and the battery. It was hiding in plain sight. Changed the fuse and all's well. Still not sure what that lump is that we feel IN the wire that we thought was an inline fuse. That's a problem for another day...
MMSCosta is offline   Reply With Quote
Old 07-28-2020, 06:22 PM   #9
JRTJH
Site Team
 
JRTJH's Avatar
 
Join Date: Mar 2011
Location: Gaylord
Posts: 26,846
The schematic on the last page of this manual depicts a 20 amp circuit breaker between the 30 amp fuse and the electric motor. I'd guess that "big sealed bump" in the cable harness is probably that circuit breaker...

Why there's a 30 amp "slo-blow fuse" followed by a 20 amp circuit breaker ??? Who knows, but there's got to be some "consideration for preservation of power without blowing the fuse" there somewhere....

Here's the link: https://images.carid.com/ultra-fab/i...structions.pdf
__________________
John



2015 F250 6.7l 4x4
2014 Cougar X Lite 27RKS
JRTJH is offline   Reply With Quote
Reply

Tags
fuse, tongue jack

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by the Keystone RV Company or any of its affiliates in any way. Keystone RV® is a registered trademark of the Keystone RV Company.


All times are GMT -8. The time now is 01:41 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.