|
05-28-2020, 12:45 PM
|
#1
|
Senior Member
Join Date: Apr 2013
Location: On the road - FT
Posts: 129
|
Bottom wear bar /swipe seal
__________________
2013 Raptor 300 MP, MORryde 8K IS, Kodiak disc brakes, 940 watt solar system, 630 ah battery bank, Magnum 2000 watt pure sine wave inverter/charger, ME-ARC, ME-AGS, ME-BMK.
2005 Freightliner Century Class S/T, 14L 60 Series Detroit, 10 spd Ultrashift, w/3.73, Trailer Saver TSLB 3 bag hitch.
|
|
|
06-15-2020, 04:08 AM
|
#2
|
Senior Member
Join Date: Apr 2013
Location: On the road - FT
Posts: 129
|
The culprit, they cut this too short during assembly! Why not cover the edges? The new roof will be for sure!
__________________
2013 Raptor 300 MP, MORryde 8K IS, Kodiak disc brakes, 940 watt solar system, 630 ah battery bank, Magnum 2000 watt pure sine wave inverter/charger, ME-ARC, ME-AGS, ME-BMK.
2005 Freightliner Century Class S/T, 14L 60 Series Detroit, 10 spd Ultrashift, w/3.73, Trailer Saver TSLB 3 bag hitch.
|
|
|
06-15-2020, 04:09 AM
|
#3
|
Senior Member
Join Date: Apr 2013
Location: On the road - FT
Posts: 129
|
New roof and decking.
__________________
2013 Raptor 300 MP, MORryde 8K IS, Kodiak disc brakes, 940 watt solar system, 630 ah battery bank, Magnum 2000 watt pure sine wave inverter/charger, ME-ARC, ME-AGS, ME-BMK.
2005 Freightliner Century Class S/T, 14L 60 Series Detroit, 10 spd Ultrashift, w/3.73, Trailer Saver TSLB 3 bag hitch.
|
|
|
06-15-2020, 04:10 AM
|
#4
|
Senior Member
Join Date: Apr 2013
Location: On the road - FT
Posts: 129
|
New floor cut from 4 x 10 marine plywood.
__________________
2013 Raptor 300 MP, MORryde 8K IS, Kodiak disc brakes, 940 watt solar system, 630 ah battery bank, Magnum 2000 watt pure sine wave inverter/charger, ME-ARC, ME-AGS, ME-BMK.
2005 Freightliner Century Class S/T, 14L 60 Series Detroit, 10 spd Ultrashift, w/3.73, Trailer Saver TSLB 3 bag hitch.
|
|
|
06-15-2020, 04:13 AM
|
#5
|
Senior Member
Join Date: Apr 2013
Location: On the road - FT
Posts: 129
|
Finishing gluing the darco on the top of the new floor. Used contact cement, used card board to separate and rolled darco as cardboard was slowly pulled out.
__________________
2013 Raptor 300 MP, MORryde 8K IS, Kodiak disc brakes, 940 watt solar system, 630 ah battery bank, Magnum 2000 watt pure sine wave inverter/charger, ME-ARC, ME-AGS, ME-BMK.
2005 Freightliner Century Class S/T, 14L 60 Series Detroit, 10 spd Ultrashift, w/3.73, Trailer Saver TSLB 3 bag hitch.
|
|
|
06-15-2020, 04:15 AM
|
#6
|
Senior Member
Join Date: Apr 2013
Location: On the road - FT
Posts: 129
|
Added slide skis to outer edges, this should minimize friction on the wear bar and provide a drip rail to minimize water wicking thru the darco.
__________________
2013 Raptor 300 MP, MORryde 8K IS, Kodiak disc brakes, 940 watt solar system, 630 ah battery bank, Magnum 2000 watt pure sine wave inverter/charger, ME-ARC, ME-AGS, ME-BMK.
2005 Freightliner Century Class S/T, 14L 60 Series Detroit, 10 spd Ultrashift, w/3.73, Trailer Saver TSLB 3 bag hitch.
|
|
|
06-15-2020, 04:16 AM
|
#7
|
Senior Member
Join Date: Apr 2013
Location: On the road - FT
Posts: 129
|
Back in again!
__________________
2013 Raptor 300 MP, MORryde 8K IS, Kodiak disc brakes, 940 watt solar system, 630 ah battery bank, Magnum 2000 watt pure sine wave inverter/charger, ME-ARC, ME-AGS, ME-BMK.
2005 Freightliner Century Class S/T, 14L 60 Series Detroit, 10 spd Ultrashift, w/3.73, Trailer Saver TSLB 3 bag hitch.
|
|
|
06-18-2020, 06:27 AM
|
#8
|
Senior Member
Join Date: Dec 2017
Location: Wandering the Country
Posts: 596
|
Holy Cow, what a job. What did you decide on one piece or two for the wear bar? Can I also assume you own a forklift?
|
|
|
06-18-2020, 08:38 AM
|
#9
|
Site Team
Join Date: Feb 2014
Location: W. Texas
Posts: 17,690
|
That was a huge and daunting task. Looks like you did an exceptional job on the repairs. Thanks for sharing and hope you were able to use one piece for the wear bar; I'm afraid 2 will be problematic as you noted.
__________________
Danny and Susan, wife of 56 years
2019 Ram 3500 Laramie CC SWB SB 6.4 4x4 4.10
2020 Montana High Country 331RL
|
|
|
06-27-2020, 06:41 PM
|
#10
|
Junior Member
Join Date: Mar 2017
Location: Sparrows Point
Posts: 4
|
how did you get the slideout removed and reinstalled?
|
|
|
06-30-2020, 05:27 AM
|
#11
|
Senior Member
Join Date: Apr 2013
Location: On the road - FT
Posts: 129
|
Quote:
Originally Posted by haywire17
how did you get the slideout removed and reinstalled?
|
A great neighbor with a skid steer with forks! That sucker weighs more than you think it would.
__________________
2013 Raptor 300 MP, MORryde 8K IS, Kodiak disc brakes, 940 watt solar system, 630 ah battery bank, Magnum 2000 watt pure sine wave inverter/charger, ME-ARC, ME-AGS, ME-BMK.
2005 Freightliner Century Class S/T, 14L 60 Series Detroit, 10 spd Ultrashift, w/3.73, Trailer Saver TSLB 3 bag hitch.
|
|
|
07-13-2020, 06:37 PM
|
#12
|
Member
Join Date: Jul 2018
Location: Oak Grove
Posts: 56
|
DMK, Wow, what a job!
I'm dreading just doing something about my collapsed wear bar.
Did you end up adding rollers? If so, where did you get them?
Did you use one piece for your wear bar?
__________________
2015 Crossroads Sunset Trail Reserve ST26RB
2005 Ford F-150
Doug, my S/O Patience, and Shelby the mutt
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|