Quote:
Originally Posted by wevernon
Yes, I was able to take an LED light drown from the ceiling. They missed the hole in the roof by about two feet. I used the existing hole for the power switch and cut a new hole under the antenna. Problem is, the Wingard is sealed down on the roof with a "ton" of sealant. I believe (hope) the wires are still curled up under the cover. I am taking it back to the dealership to unseal the antenna and put the wires down through the new hole I cut. They are then going to seal everything back up.
|
If your TV is getting signal from the antenna then I'd bet the wires for the gateway are sticking through the hole as well. Have you tried to find them.. with a hook or looked with a camera?
Linear Mode
