How to access water pump?

[Maineiacs]

The water pump on my Keystone is tucked away under the corner table next to a couch. Table is about 10 inches wide by 32 inches deep and the 10 inch side is facing me. The only access Keystone built in is a 6x6 panel on the face of the table that is removable. So I can see the pump but I can't reach any of the fittings to tighten them up. One of the fittings is weeping just enough to show water on the vinyl flooring. Have no clue which one it is.



I had envisioned removing the screws that hold the table in place, lifting it out of the way and then torquing all the clamps as necessary. Turns out there are 5 or 6 on the 10 inch back wall (32 inches away) and 6 or 8 on the 32 inch side wall. And those are the ones I can see, even if I can't reach them all!


I have square drive bits that are 6 inches long but I guess I need to find a 32 inch one somewhere! And my right angle drill adapter needs a similar extension. And then the chain saw...................


Other than that, tickled to death with our rig!