|
07-19-2021, 10:06 PM
|
#1
|
Junior Member
Join Date: Jun 2021
Location: Raymore
Posts: 11
|
Auto level
Hi folks, wife and I and 3 grands are a local getaway. Sunday got parked, freed the fiver from the truck, pressed the auto level to let it do its magic while I offed a few things from the pickup. It finished and turned itself off, I went inside and noticed I’m not quite level, we’re listing a little to the left. Thought we could tolerate it, after a day changed my mind. Thinking I can just press auto level again, it’s showing error code, left jack. Wants me to bring up all 4 jacks would rather not hook up again. Thought I could just reset it, nope. Any thoughts, or just suck it up and go through the process. It’s a 2021 Arcadia 3660 rl with a 4 point Lippert. Thanks, Steve and Terri.
|
|
|
07-20-2021, 02:42 AM
|
#2
|
Senior Member
Join Date: Mar 2015
Location: Southeastern Connectiut
Posts: 1,306
|
Hi Steve,
Welcome from Connecticut.
I am not familiar with the 4 point system, but my 6 point has a manual override to fine tune your level. It sounds like you may need to re calibrate. Lippert has good directions online.
Good luck,
__________________
Pull Toy
Steve & Jan, Ava & Emma (Mini Schnauzers):
2016 F350 Lariat 4X4 Powerstroke CC/SB "PULLTOY V"
2013 Alpine 3535RE "MAGIC CARPET IV"
Proud Navy Vet!
|
|
|
07-20-2021, 04:52 AM
|
#3
|
Site Team
Join Date: Jul 2014
Location: Modesto
Posts: 20,318
|
GC 3.0 requires all the jacks to fully retract to “rehome” them. If you have clearance, you can rehome without hooking back up, I have done it in the shop. Do you have the instructions to rehome?
__________________
2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.
Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
|
|
|
07-20-2021, 11:06 AM
|
#4
|
Junior Member
Join Date: Jun 2021
Location: Raymore
Posts: 11
|
Hi Chuckster, no I do not, of all the booklets not to get out of there with, it was the lippert leveler, sure did get away from there with the template to mount the kitchen cabinets[emoji6]Only reading the screen it wants me to raise all the jacks. Instructions to “rehome” would be super helpful. Thanks a bunch. Steve
|
|
|
07-20-2021, 11:10 AM
|
#5
|
Site Team
Join Date: Jul 2014
Location: Modesto
Posts: 20,318
|
Make sure ALL legs are extended at least 6”. Press retract, hold for 2 seconds and let go. If the legs continue to retract your good. If they stop then you haven’t extended them enough.
When ALL the jacks fully retract the pad should say ready jacks up. Extend the front to about level and then use autolevel.
__________________
2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.
Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
|
|
|
07-21-2021, 01:46 PM
|
#6
|
Junior Member
Join Date: Jun 2021
Location: Raymore
Posts: 11
|
We’ll Chuckster, just did like you instructed, worked to a T. Now I see the problem. After waiting out the auto level, it showed auto level failed[emoji30] oh well! I must be too low left. Both right Jack’s weren’t touching, both left jacks were maxed out. With one day left we can tough it out. Thanks for the great advice, we all know we can count on ‘“the forum” for helpful advice for almost any problem. Steve and Terri
|
|
|
07-21-2021, 09:31 PM
|
#7
|
Senior Member
Join Date: Feb 2019
Location: Wickenburg
Posts: 3,304
|
Although auto-level will sometimes handle campsites like this like a boss, it's not guaranteed to. This was the first time we used ours, and had I known then what I know now, I would have prepped the front end with legos first.
__________________
2019 Cougar 26RBSWE
2019 Ford F-250
|
|
|
07-22-2021, 04:25 PM
|
#8
|
Senior Member
Join Date: Oct 2020
Location: Georgia, USA
Posts: 542
|
I have started just always using legos. That way will help elimimate any chance of over extending.
__________________
Dan (USAF Retired)
2021 Cougar 290RLS w the Andersen Ultimate
2022 Ram 3500 SRW Big Horn Mega Cab
6.7L I6 CTD with Air Suspension
6 Speed Automatic 68RFE Transmission
|
|
|
07-22-2021, 04:47 PM
|
#9
|
Senior Member
Join Date: Dec 2017
Location: Shingle Springs
Posts: 338
|
Out of stroke error occurs when you have no more leg to extend. You need to put blocks under the legs and possibly the tires. Lippert has a an app called myLCI. Always someone to assist!
__________________
Tony & Donna & Murphy
2022 Montana HC 295RL, Solar Flex 400, Onan 3600 LPG, 2000 inverter, 200AH Lithium, 2020 GMC Denali 2500 6.6 Duramax, 10 speed Alison Trans, Demco 21K Auto Slide
|
|
|
07-22-2021, 06:39 PM
|
#10
|
Senior Member
Join Date: Feb 2019
Location: Wickenburg
Posts: 3,304
|
Quote:
Originally Posted by foldbak
Lippert has a an app called myLCI.
|
Just checked, and apparently not for iOS.
__________________
2019 Cougar 26RBSWE
2019 Ford F-250
|
|
|
07-22-2021, 06:49 PM
|
#11
|
Site Team
Join Date: Jul 2014
Location: Modesto
Posts: 20,318
|
Quote:
Originally Posted by LHaven
Just checked, and apparently not for iOS.
|
Look at “Lippert Now”
__________________
2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.
Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
|
|
|
07-22-2021, 10:26 PM
|
#12
|
Senior Member
Join Date: Jul 2014
Location: Hemlock
Posts: 816
|
Quote:
Originally Posted by LHaven
Just checked, and apparently not for iOS.
|
Changed the name to Lippert Now
__________________
R.J. and Ginger
2019 Ram 3500 6.7 HO, Aisin Trans 3:73
Reese Goosebox
2019 Sandpiper 379FLOK
|
|
|
04-06-2022, 11:56 AM
|
#13
|
Junior Member
Join Date: Apr 2022
Location: Sun City
Posts: 5
|
Auto Level
Just jointed up....saw this thread. This happened to me as well, I learned that the trailer has to be within 2 degrees level or an error code might be thrown.
|
|
|
04-06-2022, 05:01 PM
|
#14
|
Senior Member
Join Date: Dec 2017
Location: Shingle Springs
Posts: 338
|
__________________
Tony & Donna & Murphy
2022 Montana HC 295RL, Solar Flex 400, Onan 3600 LPG, 2000 inverter, 200AH Lithium, 2020 GMC Denali 2500 6.6 Duramax, 10 speed Alison Trans, Demco 21K Auto Slide
|
|
|
07-11-2022, 01:25 PM
|
#15
|
Junior Member
Join Date: Feb 2022
Location: Saint Helens
Posts: 6
|
Cougar 30BHS Auto-Level Issue
We have a Lippert auto-leveling system on our trailer. However, our last trip out showed an error on the display. It noted ERROR LF Jack, then the next message said to Manually Retract all jacks. I've done that several times only to have the same messages come up. What can I do to fix this on my own?
Thanks,
Cougar Den
|
|
|
07-11-2022, 03:18 PM
|
#16
|
Site Team
Join Date: Feb 2014
Location: W. Texas
Posts: 17,669
|
Quote:
Originally Posted by Cougar Den
We have a Lippert auto-leveling system on our trailer. However, our last trip out showed an error on the display. It noted ERROR LF Jack, then the next message said to Manually Retract all jacks. I've done that several times only to have the same messages come up. What can I do to fix this on my own?
Thanks,
Cougar Den
|
Do you have ground control 3.0 4 point leveling? Extend all jacks at least 6". Press and hold the retract button until it says auto retract and all jacks are retracting then let it go. Don't hold it until they all retract or you'll have to do it over.
__________________
Danny and Susan, wife of 56 years
2019 Ram 3500 Laramie CC SWB SB 6.4 4x4 4.10
2020 Montana High Country 331RL
|
|
|
|
Thread Tools |
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|