I have received the 4th AC to replace the old Carrier unit. The other 3 had some moderate to severe damage and they were returned. I received the 4th one today and have a question about the roof seal around the opening.
There is a slight bow in the rear of the seal frame area when I place a straight edge across the opening. The center is about 1/8" high. Am I being paranoid considering the 3 previous units were damage or will the inside bracket and the 4 bolts pull the unit down adequately to seal the unit to the roof?
Any opinion or thoughts appreciated. Thanks
Center as viewed from the front of the AC
Left side as viewed from the front of the AC
Right side as viewed from the front of the AC