Always remember:
• Check lug nut torque before every trip.
Keystone RV recommends this maintenance
procedure to ensure proper torque has been
applied to lug nuts before heading out on the road.
• Lug nuts should be torqued to 110-120 ft/lbs
on all units except for the Cambridge,
which requires 140-150 ft/lbs. This is due to
the use of a 9/16” stud versus a half inch stud used
on other units.
• Always follow the appropriate star
pattern as indicated in these instructions (Figure
H) or in your axle manufacturers owner’s manual
(Figure B) to assure proper torque.
This is from the Keystone manual.
__________________
Hank & Lynn
2007 Cougar 290RKS, E-Z Flex, 16" XPS RIBs ( SOLD .. Gonna miss her ... looking for new 5r)
2004.5 Dodge 2500 QC, LB, 5.9HO, WestTach gauges, Ride-Rite
|