If you cut the loop of romex one cable will be power coming from the breaker panel, the other will be going to the outlets.
They leave the wire intact to power the outlets from the breaker panel when no inverter is installed.
You can either use a pass through inverter, or cap off the line going to the circuit breaker.
With a pass through inverter the outlets will be powered from shore power when available. If you use an inverter that does not have AC pass through the outlets will be dead unless the inverter is running, even if you are connected to shore power.
Gary
__________________
2019 Laredo 255SRL
2009 GMC Sierra 2500HD Crew Cab
|