Look at the other end, is the plastic bead hanging out? If it is you can try pushing it back in, but it’s really a two person job. One holds the fabric back in the rail while the other pushes it back in. Or you can cut the excess, use a small screw to “pin” the bead and then put the excess in the loose end. Again you’ll need to hold the fabric in the rail, and “pin” it. It ain’t easy, but I just did this repair last week.
__________________
2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.
Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
|