I built a wooden platform that has anti-skid 3M material placed on outdoor plywood. The frame is made up of 2X4 Douglas Fir with reinforced corners and 3/4" plywood that is rated for outdoor use. The platform is square and is as wide as the steps are. Adjustable levelers are inside the platform so as to allow you to level the platform if this is placed on uneven ground. Small pieces of 3/4" plywood is used under the levelers to spread load out if needed. The entire platform was then sealed in Thompson Water Sealer product.
We use this for the grandkids to get into the trailer, since they were only three and five when we started taking them camping with us. Small legs could not reach the first step on the 318SAB 5er. The other thing about the platform was that this has made a nice storage box, turn upside down for item that could roll around in the basement.
This might be enough to help her get into the camper without replacing the steps.
Jim W.
__________________
Jim & Jill
2010 318SAB Cougar
2008 Dodge 6.7LCummins the original 6.7L engine, w/68RFE Auto
|