|
08-01-2021, 09:14 PM
|
#1
|
Junior Member
Join Date: Jul 2021
Location: USA
Posts: 12
|
Parts needed
06-7 raptor 3712.
12?gal boiler. Propane electric valve...
I don't know how these parts are called but I'm looking for some rebuild kits if any available.? I'm not in a hurry to buy new boiler, I rather replace some parts to have it working properly ... part on picture is bad need to be replaced, and the metal rod that goes inside with rubber gasket and spring, not sure if need to replaced, but rather put new rubbers while I'm there... enyone has gooduck finding parts/rebuild kits? TIA.
|
|
|
08-02-2021, 01:40 AM
|
#2
|
Site Team
Join Date: Oct 2011
Location: Joppa, MD
Posts: 11,752
|
That looks like the gas valve coil. You're going to need a make and model number to get the part.
__________________
Marshall
2012 Laredo 303 TG
2010 F250 LT Super Cab, long bed, 4X4, 6.4 Turbo Diesel
|
|
|
08-02-2021, 01:52 AM
|
#3
|
Senior Member
Join Date: Mar 2017
Location: Colbert
Posts: 248
|
Quote:
Originally Posted by TheStatelineATV
06-7 raptor 3712.
12?gal boiler. Propane electric valve...
I don't know how these parts are called but I'm looking for some rebuild kits if any available.? I'm not in a hurry to buy new boiler, I rather replace some parts to have it working properly ... part on picture is bad need to be replaced, and the metal rod that goes inside with rubber gasket and spring, not sure if need to replaced, but rather put new rubbers while I'm there... enyone has gooduck finding parts/rebuild kits? TIA.
Attachment 35051
|
Although some people here like Chuckster might be able to just look at the part and tell you what you need to know, you are usually much better off if you can provide more information. For example, is the hot water heater a Atwood, Dometic, or ??? If there is a label inside, is their a model number shown? On the picture you show, there is number of either C6127 or 06127. Were there any other numbers imprinted on the part? The more information you can provide, the more likely we can help you.
__________________
2017 Avalanche 320RS 5'er
2022 Ford F-350 Lariat Ultimate with 6.7L Diesel
Andersen Ultimate 5th Wheel hitch
|
|
|
08-02-2021, 02:08 AM
|
#4
|
Senior Member
Join Date: Oct 2014
Location: Germantown, TN
Posts: 6,332
|
See if any of these look likely:
https://www.google.com/search?q=gas+...WegCcwQ4dUDCA4
On edit: To bolster Chuckster's statement below, I would not rebuild anything in a water heater.
__________________
Jim in Memphis, Wife of 51 years is Brenda
2019 F450 6.7 Powerstroke
2018 Mobile Suites 40RSSA
2021 40' Jayco Eagle
2001 Road king w/matching Harley sidecar
2021 Yamaha X2 Wolverine 1000
|
|
|
08-02-2021, 03:39 AM
|
#5
|
Site Team
Join Date: Jul 2014
Location: Modesto
Posts: 20,345
|
I would get a whole new gas valve.
__________________
2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.
Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
|
|
|
08-02-2021, 04:23 AM
|
#6
|
Junior Member
Join Date: Jul 2021
Location: USA
Posts: 12
|
Suburban manufacturing.co.
More info in picture.
|
|
|
08-02-2021, 04:32 AM
|
#7
|
Junior Member
Join Date: Jul 2021
Location: USA
Posts: 12
|
Quote:
Originally Posted by chuckster57
I would get a whole new gas valve.
|
Probably I end up getting new valve, but I wonder if there is a website for RV parts that I could order from...
|
|
|
08-02-2021, 04:38 AM
|
#8
|
Site Team
Join Date: Jul 2014
Location: Modesto
Posts: 20,345
|
Amazon has them for about $50.00
__________________
2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.
Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
|
|
|
08-02-2021, 04:50 AM
|
#9
|
Senior Member
Join Date: Aug 2020
Location: Upper Chesapeake Bay
Posts: 4,837
|
Quote:
Originally Posted by chuckster57
I would get a whole new gas valve.
|
I agree 100% the only time I’d consider replacing the coil is if it was a momentary short that happened while I was working on it and I knew that was the only problem.
Gas valves are cheap and it’s not something that you want to try and save pennys on.
Things that can go boom are not where I try and save a buck.
Are you sure the gas valve is not just stuck and the coil is fine? (Don’t try and unstuck it ) you could end up with a gas valve that does not fully close and “passes gas” into the burner box
Either way it needs to be replaced.
I am a licensed gas fitter in natural and lp gases as well
__________________
2020 Cougar 315 RLS
2020 Ram 3500 6.7HO 4.10 Dually Aisin
|
|
|
08-02-2021, 07:10 AM
|
#10
|
Site Team
Join Date: Mar 2011
Location: Gaylord
Posts: 26,996
|
I agree with all that have suggested replacing the entire gas valve assembly. Taking apart a "sealed LP/NG valve to rebuild it sets up a significant risk of having a leaking gas valve inside an RV that is often used far from any fire department response in a trailer that usually has people sleeping directly over the water heater.
THIS IS NOT A PLACE TO TRY TO SAVE A FEW DOLLARS !!!!!
Replace the entire gas valve assembly !!!!!
__________________
John
2015 F250 6.7l 4x4
2014 Cougar X Lite 27RKS
|
|
|
08-02-2021, 08:34 AM
|
#11
|
Senior Member
Join Date: Jan 2019
Location: Coaldale (Southern Alberta)
Posts: 176
|
Hi, I had an issue with the water heater not firing up on propane. You could hear the solenoids clicking but apparently weren't opening. I replaced the gas valve and everything is working great (knock on wood). And since I can't leave things alone I tore the old valve apart and cleaned the plungers on the solenoids and tested them, re-installed it on the water heater worked, like brand new. But because it is a gas valve that could cause a fire or lots of damage I removed it and put the new one back on. I know, but I really had nothing better to do other than find out why and how it ticks. But for sure put a new valve on it's the safest and only way to go.
__________________
& Jim & Tovi
2019 Cougar 315RLS w/ Reese Sidewinder pin box
2011 Ram Larime CC 3500 SB 4x4 w/ Reese 5th wheel hitch
Retired-Lovin' 7 Saturdays a week!!
|
|
|
08-02-2021, 10:12 AM
|
#12
|
Site Team
Join Date: Mar 2011
Location: Gaylord
Posts: 26,996
|
Quote:
Originally Posted by jim1
Hi, I had an issue with the water heater not firing up on propane. You could hear the solenoids clicking but apparently weren't opening. I replaced the gas valve and everything is working great (knock on wood). And since I can't leave things alone I tore the old valve apart and cleaned the plungers on the solenoids and tested them, re-installed it on the water heater worked, like brand new. But because it is a gas valve that could cause a fire or lots of damage I removed it and put the new one back on. I know, but I really had nothing better to do other than find out why and how it ticks. But for sure put a new valve on it's the safest and only way to go.
|
I'm a "tinkerer" too. It's hard to resist not "trying to outsmart or outfix the manufacturer"... I can't begin to count the number of "old 8 transistor radios", TV's, Stereos, hand mixers, blenders, toasters, even Timex watches (when they were the kind that "keeps on ticking" that I took apart, "fixed" and tried to put back together. Sometimes they worked perfectly, sometimes I had a couple of "extra parts" and sometimes I got them apart, "fixed" and put them back together and they worked for a couple of minutes or so, then "BOOM" either the smoke escaped or the Timex stopped ticking.....
On an item with "severe consequences if it fails" like you, I want to fix it, but the 'better part of valor' tells me that even if it works, it may not be the best choice to rely on it in a "life/death" situation.
__________________
John
2015 F250 6.7l 4x4
2014 Cougar X Lite 27RKS
|
|
|
08-02-2021, 01:54 PM
|
#13
|
Junior Member
Join Date: Jul 2021
Location: USA
Posts: 12
|
Thanks . Ordered complete new valve.
Now next part needed [or not?] is fridge main board [or something else?]... Sizors/players on picture aint my magic... bought it this way....front panel , led code 5blinks every 3sec.? Bypass 110V work. Propane doesn't work... any clues where to start? TIA.
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|